Guest vansterdam731 Posted March 19, 2015 Share Posted March 19, 2015 ok i got 1993 jdm 2jzgte...bigger downpipe,bigger intercooler and piston done.. i have a boost controller and i have the setting off...i want to run stock boost.. i was told stock boost was around 10psi..but in 3rd gear i am running around 17psi to 20psi.. can someone tell me why this is happening? Quote Link to comment Share on other sites More sharing options...
Chris Bailey Posted March 19, 2015 Share Posted March 19, 2015 Because you have a bigger downpipe, front mount intercooler, boost controller. You basically have a half bpu car. Quote Link to comment Share on other sites More sharing options...
add heywood Posted March 19, 2015 Share Posted March 19, 2015 A boost controller can only increase boost, not decrease it. The standard exhaust limits the amount of exhaust gasses going through the turbos. Because you have increased the flow of the exhaust your boost has increased. Be carefull if you're on standard injectors and fuel pump etc Quote Link to comment Share on other sites More sharing options...
Glanza_Mike Posted March 19, 2015 Share Posted March 19, 2015 You'll be needing a restrictor ring in the downpipe by the sounds of it. Quote Link to comment Share on other sites More sharing options...
Guest vansterdam731 Posted March 20, 2015 Share Posted March 20, 2015 so are u guys saying for my supra to go back to stock boost ...i have to change my car back to stock parts? Quote Link to comment Share on other sites More sharing options...
Mk4Gaz Posted March 20, 2015 Share Posted March 20, 2015 No, if you fit a 2" restrictor ring in your downpipe, you should be much closer to factory boost levels. Quote Link to comment Share on other sites More sharing options...
Guest vansterdam731 Posted March 20, 2015 Share Posted March 20, 2015 oic..ill look in to that....thxs Quote Link to comment Share on other sites More sharing options...
JackyBoi Posted March 20, 2015 Share Posted March 20, 2015 Be careful mate, sounds like you could, at times, be running a little over 1.2bar which on stock jspec turbos isn't good news as they can realistically only handle 1.2bar reliably. Fit a restrictor ring as mentioned above Quote Link to comment Share on other sites More sharing options...
Guest vansterdam731 Posted March 20, 2015 Share Posted March 20, 2015 what is the stock the boost surpose to be at? Quote Link to comment Share on other sites More sharing options...
Wez Posted March 20, 2015 Share Posted March 20, 2015 0.8bar or there abouts Quote Link to comment Share on other sites More sharing options...
JackyBoi Posted March 20, 2015 Share Posted March 20, 2015 what is the stock the boost surpose to be at? 0.7 bar Quote Link to comment Share on other sites More sharing options...
Guest vansterdam731 Posted March 20, 2015 Share Posted March 20, 2015 thxs Quote Link to comment Share on other sites More sharing options...
Nic Posted March 20, 2015 Share Posted March 20, 2015 Click here -> BPU Quote Link to comment Share on other sites More sharing options...
Tyson Posted March 20, 2015 Share Posted March 20, 2015 thxs Can you use proper words please not text speak Quote Link to comment Share on other sites More sharing options...
Guest vansterdam731 Posted March 21, 2015 Share Posted March 21, 2015 sorry but i like to text speak Quote Link to comment Share on other sites More sharing options...
Tyson Posted March 21, 2015 Share Posted March 21, 2015 sorry but i like to text speak Well it's not tolerated so please don't Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.