evinX Posted January 24, 2015 Share Posted January 24, 2015 Hi all, has anyone ever retro fitted the driver window switch with the led to the passenger side which dosent have one? Everytime I have a passenger in the dark they can never find the window switch. Has it been done to make things easier, because this is my next little challenge that will probably involve stripping half the interior to do:D Quote Link to comment Share on other sites More sharing options...
Al Massey Posted January 24, 2015 Share Posted January 24, 2015 I spoke to heckler about this He's done it before but says its a nightmare with the power as a cable needs to be routed from the drivers door, behind the dash to the passenger door. It is on my list of things to do Quote Link to comment Share on other sites More sharing options...
evinX Posted January 24, 2015 Author Share Posted January 24, 2015 I spoke to heckler about this He's done it before but says its a nightmare with the power as a cable needs to be routed from the drivers door, behind the dash to the passenger door. It is on my list of things to do Drawing the power is no problem for me, getting the actual unit working properly would be my main challenge. Using a driver side switch with the clear square, on the passenger side and getting the switch mount to fit with 2 prongs as apposed to 1, im going to get me a pass side switch and strip it down as I have a spare driver side unit, I think this is do'able. Will keep you posted in this thread Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.