supra TT 94 replacement air intake pipe?

Hey guys,

Will try to explain what I am trying to replace here.

Basically looking to replace the black plastic air intake pipe that runs from the engine area to the induction filter end.

Does anyone know of any aluminium pipes that can replace the standard plastic piping?

Any help is appreciated.

Regards

Ash

Seconds this. Also looking for the same thing

Did find 2 items on ebay which may be the answer.

One was a universal aluminium piping kit for induction, which could possibly work:

http://m.ebay.co.uk/itm/151102118131

The second was a Japspeed induction pipe kit, which are usually quality items. I have contacted them to see if it replaces the plastic pipe.

http://m.ebay.co.uk/itm/160763395293?nav=SEARCH

Will write back when I hear from japspeed

I've got the Japspeed one on mine, didn't like the inferior looking plastic bends, plus there is no way of attaching the filter, so you'll need to order an aluminium coupling

Here is the Japspeed kit fitted (with silicone elbows)

I'd be asking them what the filter is in the kit as it sounds like it will be cheap rubbish.

An Apexi dual cone filter which is one of the best will cost approx £70 on it's own !!

There should be lots of tube bent to most angles available on the net, same goes for the

silicone hose connectors, they should be off the shelf in most colours from sfs, viper etc

Ok guys when you find one please sell me the stock pipe

Ok so japspeed got back to me. There is no filter included anyway, it's just the hard pipe.

And you can attach any aftermarket filter to it.

In regards to the aluminum couplings, shouldn't I already have one if I've got a Hks super induction system attached to the plastic piping?

Post photos of what you have would be the best thing to do, are you keeping the HKS filter

induction part ? HKS used to make a hard pipe to go with their filter, might be worth a search

for that

Have a look on Nengun website

Just ordered the japspeed one. I looked all day yesterday and couldn't find any others.

It should fit the Hks fine. I've got all the attachments for it.

I will be looking to upgrade to a blitz induction filter in the near future.

I have bean after the HKS hard pipe for about two years. lol i even put up a wonted add but got nothing back. must be very rare now.

Going to a Blitz is not an upgrade and a waste of cash if your on about the

super dooper induction thing.

OE airbox is the way to go or if you cant get one get an Apexi dual cone

filter or K&N

I have bean after the HKS hard pipe for about two years. lol i even put up a wonted add but got nothing back. must be very rare now.

Maybe you should have posted a wanted add?