PDA

View Full Version : Alpine Sat Nav


Wazz72
14-01-05, 18:13
Bought an Alpine double din sat nav unit (part no: 39541-S9A-G020-M1) Should fit in any car, but the ISO lead has been cut, does anyone know where i can get either a loom to fit my supra, or a wiring diagram to patch the loom?
It came out of a honda as the DVD sat nav disk says honda on it, but its never been used.
Thanks

Matt Harwood
15-01-05, 00:01
I can supply you with a Toyota wiring adaptor easy enough, and probably tell you what colours Alpine use...
However, before you get too carried away, that part number means absolutly nothing to me, so I expect it's a factory fit unit. Are you sure it's a UK unit? - If not, chances are, it won't work in this country :(

Wazz72
15-01-05, 01:25
Thanks for replying Matt, It's a uk unit, and Brand new by the look of it. what type of cable is it, and how much?, and how do i get one?
Here are some pics of it:

Matt Harwood
15-01-05, 13:55
OMG!
The only plugs I instantly recognise on the rear of that unit, is the GPS aerial, and FM aerial plugs....

The only way forward I can see with this would be to get hold of a Honda with one installed and see what the plugs actually do.

I doubt Alpine UK will be any use as they are only privy to information regarding UK aftermarket units. :(

If there's anything I can do to help, feel free to ask, but as you're a fair distance from me, I don't think there's too much help I can offer...