royh Posted August 25, 2014 Share Posted August 25, 2014 Looked at the search button and still cant figure out which et and J size to get,So looking for advice please:D Found these http://www.japshop.co.uk/acatalog/XXR-531.html#a4160 Will these fit my j-spec with stock brakes without rolling the arches? Quote Link to comment Share on other sites More sharing options...
Scott Posted August 25, 2014 Share Posted August 25, 2014 Tyre width is an important factor. +20 is a fairly aggressive offset for a stock sup. Anything around 9.5" rears with a +35 offset and 265 tyres would most likely be fine. You would also get away with 10" rims with a higher offset. Subtract an inch for the fronts with a similar offset and you would be fine. Quote Link to comment Share on other sites More sharing options...
Chris Bailey Posted August 25, 2014 Share Posted August 25, 2014 (edited) Mike33 on the forum is running them exact wheels with 8.5J fronts and 9.5J rears ET35 all round with stock arches and j-spec brakes all round and they clear. You can purchase a full set of XXR 531's on SRB power with sprigot rings and wheel nuts for £800-850. Just incase you want to compare prices. Edited August 25, 2014 by Chris Bailey (see edit history) Quote Link to comment Share on other sites More sharing options...
royh Posted August 25, 2014 Author Share Posted August 25, 2014 Many thanks guys Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.