a98pmalcolm Posted August 19, 2014 Share Posted August 19, 2014 Hi all. I'm doing ALL my bushes next month except I can't find 1 type. Its the rear diff bush (the 2 large ones. One with 1 bolts through it and the other with 2 bolts) I have seen uprated ones that are red (I'm not fussed on colour) but its obvious the red ones aren't stock. Can any one advise me? I have attached a picture so were sure on the ones I mean Thanks Paul These ones:: Quote Link to comment Share on other sites More sharing options...
Homer Posted August 19, 2014 Share Posted August 19, 2014 I can get you the part number for the OEM one, but it'll likely be very expensive. Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted August 19, 2014 Author Share Posted August 19, 2014 Thanks for the reply bud but I'm after an after market one.. Quote Link to comment Share on other sites More sharing options...
Jellybean Posted August 22, 2014 Share Posted August 22, 2014 Thanks for the reply bud but I'm after an after market one.. Only after Market ones are Billet Aluminium Press in Or Weld In (.i.e. Power house racing) If you want a rubber bush only OEM is available, they are about 150-170 GBP for the pair Toyota Cushion for 1993-98 Toyota Supra TT Part # 41651-14020 Toyota Cushion for 1993-98 Toyota Supra TT Part # 41651-14010 Quote Link to comment Share on other sites More sharing options...
Wez Posted August 22, 2014 Share Posted August 22, 2014 Only after Market ones are Billet Aluminium Press in Or Weld In (.i.e. Power house racing) Robinson Race Cars also do solid mounts, I have them on mine and I think the Whifbitz track cars also had them. Be warned though, removing the compliance is great for track but not necessarily on our bumpy roads Quote Link to comment Share on other sites More sharing options...
LOGIE Posted August 22, 2014 Share Posted August 22, 2014 I got a set of Power house racing ones from MVP motorsports. Cant recall the price I paid. Drop them a pm. Quote Link to comment Share on other sites More sharing options...
LOGIE Posted August 22, 2014 Share Posted August 22, 2014 Quote Link to comment Share on other sites More sharing options...
Dnk Posted August 23, 2014 Share Posted August 23, 2014 Thanks for the reply bud but I'm after an after market one.. Can i ask why ? Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 23, 2014 Share Posted August 23, 2014 If for whatever reason you fit solid rear diff mounts you *MUST* *MUST* *MUST* also fit solid front mounts or the loadings into the diff case and subframe, and the new mounts will be sensationally high and something will fail or fatigue. If you fit solid bushes expect a lot of noise, harshness and vibration. Quote Link to comment Share on other sites More sharing options...
LOGIE Posted August 23, 2014 Share Posted August 23, 2014 I never actually fitted mine there still in my garage somewhere. Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted August 25, 2014 Author Share Posted August 25, 2014 If for whatever reason you fit solid rear diff mounts you *MUST* *MUST* *MUST* also fit solid front mounts or the loadings into the diff case and subframe, and the new mounts will be sensationally high and something will fail or fatigue. If you fit solid bushes expect a lot of noise, harshness and vibration. Thanks Chris and all that replied. Ok after speaking to Paul Whifin and Lee P there are uprated Poly/alloy kits for them. I would go fully solid after being told that the vibration is a terrible and as I use my car as a daily runner it would be an ass. I'm awaiting some responses and will be you updated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.