PDA

View Full Version : Chaz's gz aero bw 91/79 Now updated with syvecs



chazuk
17-08-14, 10:52
Engine Type - Single

Engine Spec - Stock /greddy style intake /arp headstuds

Turbo - BW S368 .91ar

Stock Cams

Intercooler - Greddy 3 row

Injectors - Sard 800cc

Fuel Used - Tesco 99

Exhaust - 3dp/mp /3"rsr exhaust

Transmission - V160

ECU - Power FC

Mapped By - Ryan G

Dyno Used - SRR

Power figure - 622bhp flywheel 520 rwhp

Torque figure - 530ftlb

Boost Pressure - 1.5bar

192843

New dyno 14/10/14

Engine Type - Single

Engine Spec - Stock /greddy style intake /arp headstuds

Turbo - BW S368 .91ar

Stock Cams

Intercooler - ETS 4" intercooler

Injectors - Sard 800cc

Fuel Used - Tesco 99

Exhaust - 3dp/mp /3"rsr exhaust

Transmission - V160

ECU - Syvecs S6

Mapped By - Ryan G

Dyno Used - SRR

Power figure - 668 bhp flywheel

Torque figure - 570ftlb

Boost Pressure - 1.7bar

Massive thanks to Ryan today top job as normal. I am really pleased with the Syvecs and the TC in the wet is amazing .

Ryan said I have pretty much reached the limit of my injectors and pump but no plans more so happy with this.

192844
192845

chazuk
17-08-14, 10:57
Changing to a syvecs at the moment and ditched the very old greddy fmic for a ets 4" will update

Luxluc
17-08-14, 21:42
Were you on stock cams?

tkddav3
17-08-14, 21:53
Forgotten about your car. Much changed as you said you were swapping everything into a track shell?

chazuk
18-08-14, 09:57
Were you on stock cams?

Yes stock cams . I am tempted to stick some cam's in but not really sure if I would see a good gain bang for buck also I hear you loose a little bit of spool, my setup is old now this is the early whifblitz single wastegate manifold kit. I remember ages ago Whiffen told me I could get my turbo wheel updated for around 500 that might be better than cams not sure ?


Forgotten about your car. Much changed as you said you were swapping everything into a track shell?

I pulled out of the track car due to recently getting a house , but I held onto some of the good bits so its all back in the aerotop some extra bits are superpro bushes , big case diff with os giken type x lsd ,ets 4" intercooler, syvecs, koyo rad,spec clutch,megan rose jointed rear toe and traction.

chazuk
14-10-14, 19:05
Syvecs mapped updated first post instead

JamieP
14-10-14, 19:18
Good power considering you have a 3" exhaust, stock cams?

chazuk
14-10-14, 19:28
Good power considering you have a 3" exhaust, stock cams?

Ryan said the same thing ,yea stock cams

Luxluc
14-10-14, 20:30
Good result mate.

baldy
14-10-14, 21:00
Nice result

chazuk
31-10-14, 14:29
Good result mate.


Nice result

Cheers guys , I now just need to stop looking at set of ID's and a better fuel system oh and a upgrade wheel on the turbo

Parry_10
31-10-14, 15:04
Nice mate