Jellybean Posted March 17, 2014 Share Posted March 17, 2014 Hey Does anybody have any advise on assembling a two piece wheel, Volk GTC, Blue thread lock, Bolt pattern when tightening , torque ? Any tips and tricks appreciated Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 17, 2014 Share Posted March 17, 2014 Are they nuts and bolts or just bolts into the alloy Quote Link to comment Share on other sites More sharing options...
Jellybean Posted March 17, 2014 Author Share Posted March 17, 2014 Hex Bolt and Nut Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 17, 2014 Share Posted March 17, 2014 Check with Ibrar but if i remember correctly we did mine to 22 ft lbs with a dab of thread lock and that was with a nut & bolt set up using M7 X 1 and with 45 bolts Quote Link to comment Share on other sites More sharing options...
Jellybean Posted March 17, 2014 Author Share Posted March 17, 2014 Check with Ibrar but if i remember correctly we did mine to 22 ft lbs with a dab of thread lock and that was with a nut & bolt set up using M7 X 1 and with 45 bolts Thanks Dunk! Mine have 80 bolts and nuts ! 4 per spoke Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 17, 2014 Share Posted March 17, 2014 (edited) Sorry mate i might have misled you there. Mine were 45 bolts in each wheel !! from what i've read you use a less amount of torque compared to a wheel with fewer bolts. No idea how true that is though We went round all the bolts getting them finger tight then used a criss cross pattern torquing them up. Edited March 17, 2014 by Dnk (see edit history) Quote Link to comment Share on other sites More sharing options...
Jellybean Posted March 17, 2014 Author Share Posted March 17, 2014 Cool , thanks ; taught I will need to do a criss cross pattern torquing them up, when I was undoing them 2 mm of thread was through the nut so will aim for that Thanks Quote Link to comment Share on other sites More sharing options...
mplavery Posted March 17, 2014 Share Posted March 17, 2014 were in the process of bolting some GTC's up too think its 25- 27ft lbs but were trying to confirm thats right lol Quote Link to comment Share on other sites More sharing options...
Jellybean Posted March 17, 2014 Author Share Posted March 17, 2014 were in the process of bolting some GTC's up too think its 25- 27ft lbs but were trying to confirm thats right lol Let me know how you get on Hopefully will have my barrels back the weekend! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.