J Spec ecu in UK spec car??

[Wipeout]

Is it possible to fit a J Spec (Blitz Access) ECU into a UK Spec car?

Thanks

[Matt Harwood]

The first problem I can see is that the JDM one won't be set up to run a MAF sensor, so no, unless you can get it reprogramed. But first you need to find out if it can support the MAF sensor

[Wipeout]

Probably more hassel than it's worth. I know nothing about it.

There is one on ebay at the moment, £50 so far. Seems like a good buy if it stays at that, but i doubt it will.

Here (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=10428&item=7940793501&rd=1&ssPageName=WDVW)

Cheers Matt

[Soonto"HAS"soop]

Why does that ECU have an extra black wiring block??

[Ian C]

That's a metal tang that slots into a hole in the bulkhead...

-Ian

[Barry]

Does that ECU completely replace the stock ECU then, or does it sit piggyback to the stock unit?

Or, if it replaces the stock one, will you need a fuel computer to go with it?

:thumbs:

[Ian C]

Completely replaces it and does who-knows-what with the fuelling, timing, rev limit etc. :D

Deffo don't use a piggyback, if you are going to use an airflow fudger then stick with a stock ECU as a base.

-Ian