WaLKeRR Posted December 9, 2013 Share Posted December 9, 2013 Right... My car had a custom map at Tuning developments and car was fine drove perfect for a month or two, but recently i changed the air filter and the pipe from the front of the turbo, and noticed the dizzy moved (usualy held tight with a 10mm?), and now this has affected my afr under boost from 11dead to 12.7+, im wondering what the car runs stock wise on the advanced/retard on the dizzy or am i best to ring TD up and explain this situation to them? incase they have changed the dizzy themselves? Help!! Cheers Rob Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted December 9, 2013 Share Posted December 9, 2013 If the dizzy has moved the the timing is all to whack yo. Need to get it checked and reset. Take it back to TD if I were you. Quote Link to comment Share on other sites More sharing options...
Luxluc Posted December 9, 2013 Share Posted December 9, 2013 12.7 under load is way too lean. Get it checked before you kill the engine. Quote Link to comment Share on other sites More sharing options...
WaLKeRR Posted December 9, 2013 Author Share Posted December 9, 2013 Just rang TD and they have told me what the timing is set to (10 degrees) so tomorrow when i have light il go and have that set again and be back to normal safety!! Quote Link to comment Share on other sites More sharing options...
WaLKeRR Posted December 9, 2013 Author Share Posted December 9, 2013 (edited) Double post... Edited December 9, 2013 by WaLKeRR double post (see edit history) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.