Guest Gazamcw Posted November 16, 2013 Share Posted November 16, 2013 Hi there I'm now a proud owner of a mkiv supra n/a. So far only got one problem my engine light keeps apeering and starts to rev to 2000 and jolts all the time any help? What this could be as my diagnostic kit doesn't work on the car many thanks Gazamcw Quote Link to comment Share on other sites More sharing options...
The-Plethora Posted November 19, 2013 Share Posted November 19, 2013 Hey there and welcome. There are a few of us around in Gloucestershire now. What are you using as a diagnostic kit? If it's the same as the TT then all you need is a paperclip to join the terminals T1 and TE1 in the diagnostic ports, turn the key halfway and count the light blinks. Theres a full guide in the tech section somewhere on how to do this. I don't claim to be an expert but dont mind lending a hand if you are stuck and not too far away. Quote Link to comment Share on other sites More sharing options...
Graham1984 Posted November 19, 2013 Share Posted November 19, 2013 Welcome to the club, a high idle on a cold start can be very common on NA's, mine can get near there but settles down after a minute or so usually by 200rpm every so often...... as for the other bit I don't have a clue. Quote Link to comment Share on other sites More sharing options...
Fly Posted November 19, 2013 Share Posted November 19, 2013 Welcome, could it be the icv? As has been said bridge the two ports count the blinks. There's plenty of info scattered about the club. My suggestion would be to spend the best ten pounds you've ever spent and become a member! Quote Link to comment Share on other sites More sharing options...
Guest Gazamcw Posted November 19, 2013 Share Posted November 19, 2013 Hey there and welcome. There are a few of us around in Gloucestershire now. What are you using as a diagnostic kit? If it's the same as the TT then all you need is a paperclip to join the terminals T1 and TE1 in the diagnostic ports, turn the key halfway and count the light blinks. Theres a full guide in the tech section somewhere on how to do this. I don't claim to be an expert but dont mind lending a hand if you are stuck and not too far away. Snap on kit. I've looked online and it said for me to use the port e1 and te1 ill now try them ports thank you very much. And thanks for the offer I may take that up one day as I'm still learning my self thanks everyone . Ill update very soon if this works. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.