skippyboyo1 Posted August 28, 2013 Share Posted August 28, 2013 As above guys, Looking for a good quality one? I don't fancy fitting anything cheep of eBay. Anyone no where to get a good one? Quote Link to comment Share on other sites More sharing options...
skippyboyo1 Posted August 29, 2013 Author Share Posted August 29, 2013 Morning bump... This Is a valve that goes In the exhaust that can be opened or closed. Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted August 29, 2013 Share Posted August 29, 2013 I have never seen even a half good one available commercially, personally I'd make one from the ceramic exhaust gas control valve from a TT engine, they are designed for the job and making one of similar quality would be very hard and VERY expensive. Not quite sure why one would want or need one though I would use the existing pneumatic actuator and a VSV to operate it, the whole thing could be OE bits Quote Link to comment Share on other sites More sharing options...
David P Posted August 29, 2013 Share Posted August 29, 2013 I have an automatic one for sale? http://www.mkivsupra.net/vbb/showthread.php?284893-Apexi-spring-loaded-tail-silencer-115mm Quote Link to comment Share on other sites More sharing options...
Nic Posted August 29, 2013 Share Posted August 29, 2013 http://www.quicktimeperformance.com/QTEC/ http://www.spracingonline.com/store/SP_Exhaust_Cutout_3__34___Boost_Activated_/3673 http://www.dmhperformance.com/ http://www.mkivsupra.net/vbb/showthread.php?194439-Dan-s-Supra-Project&p=2712590&viewfull=1#post2712590 Quote Link to comment Share on other sites More sharing options...
skippyboyo1 Posted August 29, 2013 Author Share Posted August 29, 2013 http://www.quicktimeperformance.com/QTEC/ http://www.spracingonline.com/store/SP_Exhaust_Cutout_3__34___Boost_Activated_/3673 http://www.dmhperformance.com/ http://www.mkivsupra.net/vbb/showthread.php?194439-Dan-s-Supra-Project&p=2712590&viewfull=1#post2712590 Can always count on you mate ha Quote Link to comment Share on other sites More sharing options...
walbertonio Posted August 29, 2013 Share Posted August 29, 2013 I had the QTP system fitted on the previous VXR8 just before the stock back boxes, sounded brutal when open. Bear in mind though the normal back boxes on a VXR8 are ridiculously massive, so the effect of these was rather pronounced. Switch was in the centre console but was a little naff. Good system overall though for the money. As Chris Wilson suggests though, something automated using OE bits would be so much better. Quote Link to comment Share on other sites More sharing options...
skippyboyo1 Posted August 30, 2013 Author Share Posted August 30, 2013 Thanks for the feedback lads, not interested in performance gains etc just the lairy sound now and again. Cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.