New wheel ET Help

Ok folks so im going to purchase new wheels only things is i really dont no what the story is with ET/offset? Wheels im looking at here stae they are 2x 18x8.5^ ET15

2x 18x9.5^ ET18

What yous reckon is that good for supra? What im going for is a good aggresive stance with the wheel sitting pretty flush against the arch or even out a bit from it

Thanks for any help

If I have offsets correct in my head right now, then they will stick out a bit. I can't remember the maths off the top of my head to work out how far though.

Westy's bronze supra has a great offset and look, think the fronts are 38 rears 30 on an 9.5' all round.

His already looks close to the arches, so an 18 imo would rub

http://www.mkivsupra.net/vbb/showthread.php?289814-MarkWs-Bronze-Behemoth&highlight=bronze

You will be fine with arch work, maybe need to run a 255 tyre max

Ok folks so im going to purchase new wheels only things is i really dont no what the story is with ET/offset? Wheels im looking at here stae they are 2x 18x8.5^ ET15

2x 18x9.5^ ET18

 

What yous reckon is that good for supra? What im going for is a good aggresive stance with the wheel sitting pretty flush against the arch or even out a bit from it

 

Thanks for any help

The wheel pictured are 18x9 +32 & 18x10 +32 and sit flush with the wheel arches. As a comparison, the 18x8.5 +15 front wheels will stick out 11mm further, the 18x9.5 +18 rears will stick out 8mm further.

I've got 18 x 8.5 et 15 up front, with a 225/35, and 18 x 9.5 et 15 rear with a 245/35 tyre.

Mines lowered on tein coilovers, and I have about a 30mm arch gap on the rear on the hardest setting, and a 20mm arch gap at the front, on setting 12.

I rolled the lip of my rear arches the heath robinson way, with a bfh, and they occasionally catch on a real nasty stretch of road. I'm going to get arch enemy round to give them a further tweak when I can

Thanks for the info, what do we reckon then, if it was lowered with my arch's rolled would the stick out look silly or awesome lol