skippyboyo1 Posted August 4, 2013 Share Posted August 4, 2013 Found this picture and was wondering when the front indicators are removed where do they put them insted? Quote Link to comment Share on other sites More sharing options...
David P Posted August 4, 2013 Share Posted August 4, 2013 (edited) I used Elliptical Hella Angel Eyes instead of the stock indicators and put orange bulbs in the U.K. headlamp sidelights for indicators. The LED's are sidelights and have gained a pair of spotlights. Edited August 4, 2013 by David P (see edit history) Quote Link to comment Share on other sites More sharing options...
listy Posted August 4, 2013 Share Posted August 4, 2013 Iirc the MOT doesn't require front foglights, only the rear. To that end, you could stick the indicators in the fog light position. Quote Link to comment Share on other sites More sharing options...
safcdixon Posted August 4, 2013 Share Posted August 4, 2013 (edited) Iirc the MOT doesn't require front foglights, only the rear. To that end, you could stick the indicators in the fog light position. That's what I have done on mine, seeing as I now have nowhere to mount them due to filling the front bumper side holes in, They aren't very bright at all though see-able but not great imo, I did it by drilling the hole slightly larger on the back of the fog light mounting as the hole is quite small. Thought I would add if you have facelift front lights remember the sidelight is in the indicator, Im going to fit the front bumper markers soon and make them my front indicators as I have the Abflug inserts too fit so then the side light will be relocated to the old fog light fitting Edited August 4, 2013 by safcdixon (see edit history) Quote Link to comment Share on other sites More sharing options...
Noz Posted August 4, 2013 Share Posted August 4, 2013 I'm making a strip of LED's to put in the vent holes where OEM indicators go. It should be a fairly straight forward setup. Quote Link to comment Share on other sites More sharing options...
supra_ufo Posted August 4, 2013 Share Posted August 4, 2013 My side lights are wired into the fogs and the indicators are wired into the sides, hey it passed its MOT, im not complaining Quote Link to comment Share on other sites More sharing options...
Lee_e Posted August 4, 2013 Share Posted August 4, 2013 I'm making a strip of LED's to put in the vent holes where OEM indicators go. It should be a fairly straight forward setup. Sounds interesting Noz..get some pics up when your finished Quote Link to comment Share on other sites More sharing options...
skippyboyo1 Posted August 5, 2013 Author Share Posted August 5, 2013 Thanks for the info guys Quote Link to comment Share on other sites More sharing options...
mellonman Posted August 5, 2013 Share Posted August 5, 2013 Im sure your allowed to ue arm signals or has it been that long since I passed my test ? Quote Link to comment Share on other sites More sharing options...
skippyboyo1 Posted September 7, 2013 Author Share Posted September 7, 2013 Bit of a bump, so when changing from uk spec lights to facelift will I need facelift looms to match then?, I'm not thinking so thinking about it unless the actual bulb screw in's are different? If I keep my original looms the high beam will be in the same place, my sides will become redundant, the fogs will become the indicators and the dipped beam again in the same position. Bloody confusing! But will save me cash not having to buy the looms. Quote Link to comment Share on other sites More sharing options...
Supra Gaz Posted September 7, 2013 Share Posted September 7, 2013 Bit of a bump, so when changing from uk spec lights to facelift will I need facelift looms to match then?, I'm not thinking so thinking about it unless the actual bulb screw in's are different? If I keep my original looms the high beam will be in the same place, my sides will become redundant, the fogs will become the indicators and the dipped beam again in the same position. Bloody confusing! But will save me cash not having to buy the looms. I didn't change my looms when I upgraded. I run custom side lights and indicators though. Quote Link to comment Share on other sites More sharing options...
skippyboyo1 Posted September 7, 2013 Author Share Posted September 7, 2013 I didn't change my looms when I upgraded. I run custom side lights and indicators though. What did you do with the sides and indicators? Quote Link to comment Share on other sites More sharing options...
Supra Gaz Posted September 8, 2013 Share Posted September 8, 2013 What did you do with the sides and indicators? I will take a pic when I get home dude, basically I used button bolt LEDs, and wired them in. If you look on the bay of E you will see them. They are really quite bright. Quote Link to comment Share on other sites More sharing options...
skippyboyo1 Posted September 8, 2013 Author Share Posted September 8, 2013 I will take a pic when I get home dude, basically I used button bolt LEDs, and wired them in. If you look on the bay of E you will see them. They are really quite bright. That will be brilliant gaz thank you Quote Link to comment Share on other sites More sharing options...
skippyboyo1 Posted September 9, 2013 Author Share Posted September 9, 2013 Come on gaz you home yet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.