...And the madness begins!!

[V8 Killer]

As promised in my introduction thread we are now prepared to offer you the best pricing on products delivered to your door!

This is a long post because I am trying to explain everything. Please take a few minutes to read this before asking questions. Please post any related questions to this here so everyone can see the answer. If you have specific questions that others will not benefit from hearing the answer please e-mail (dusty@mvpmotorsports.com) me privately!!

Here is how it will work:
Once every few weeks we will ship a large order of parts via Air to a very well known and trusted BBS member in England. From there he will ship out everyone’s parts directly to your door.

You will pay us the total up front for the part, just like you would any other trader. I will quote you the exact total of Pounds / Dollars to pay. The price will include everything! The price will include shipping from MVP to England, VAT, Customs fees, and even shipping from our friend to your door anywhere in the U.K.

Anything we sell I will be able to give you a total price delivered to your door. Every month I will offer new specials at unbelievable prices.

How to pay:
I accept bank wire transfer, you can mail me a check or money order, or you can Paypal. If anyone does not understand how to do one of these payments please e-mail (dusty@mvpmotorsports.com) me.
I will give you the total amount to pay including all the shipping, taxes, etc.
We are working on taking credit cards but we are not there yet. I will keep everyone posted on that future goal.
The Paypal e-mail address is paypal@mvpmotorsports.com - NOT dusty@mvpmotorsports.com

If you want parts not listed on this special:
No problem!!! Just e-mail (dusty@mvpmotorsports.com) me and I will give you a total cost including shipping, taxes, etc. These parts will be very cheap because we are combining everyone’s orders to make a bulk shipment to one location in England. So if you want a few gauges or boost controller or intake it would cost you almost no shipping! If you want an exhaust or harness bar or turbo kit or even a set of wheels shipping will be cheap because it will be going in bulk!

Our first shipping date!!:
About December 15th we are shipping everything we have ordered and paid for. It will arrive in England 5-10 days later. It will immediately be shipped to your door. All you do is sign for the parts when the courier shows up with your Christmas present!

All I ask is to give this a chance, you will see how much you can save!! Dozens of you have already ordered from MVP Motorsports. You already know about my level of service, my prices, and my support. MVP Motorsports is THE Supra specialist in the USA. We carry virtually every part made for the Supra here. We stock more than anyone else, this I am 100% certain of!

If you need parts quicker and direct to your door:
No problem!! As many of you have already discovered I can ship you parts to your door directly from MVP. I can deliver them to you in a matter of days for less money than other UK traders. Get your parts quicker and cheaper, what more could you ask for?! I will still offer this same service for anyone that wants to deal direct with me and bypass shipping them to my friend first.

On to the specials!!
You must buy and pay for the parts listed here by December 31st, 2004 if you want these listed prices. If you pay for them before our first shipping date (about December 15th) then you should have the parts in your hand before the new year. We will make another shipment in the first half of January to deliver all parts paid for after December 14th. Remember if you want other parts it is no problem, just e-mail me!

These prices include shipping to England, VAT, Customs, shipping to your door. These prices include the Paypal / wire transfer fee!

Greddy 3-row FMIC complete kit: £840

RS*R GT-2 Exhaust: £330

Blitz NUR-spec Exhaust: £425

Blitz SUS Intake Kit: £160

Tein S-Tech Springs: £150

Eibach Pro Kit Springs: £160

MVP Carbon Fiber Radiator Cooling Plate: £65

MVP Original Fields One-Touch Replica Harness: £175

AEM Wide-Band UEGO Kit with 52mm Gauge: £275
(your choice of color)

Volk 18" (18x9 and 18x10) GT-N GunMetal: £1350
Very limited on quantity at this price!!

Volk 18" (18x9 and 18x10) GT-7 GunMetal: £1375
Very limited on quantity at this price!!

Volk 18" (18x9 and 18x10) Black SPECIAL ORDER!! GT-7 set: £1450
Very limited on quantity at this price!! Normally this special order set requires 90 days to go from Japan to the USA - I have them IN STOCK!!

Volk prices include lug-nuts, hub-centric rings, valve stem seals, and valve stem caps.
Price does not include the 4 optional GT Center Caps. Cost on them bought with the wheels is [COLOR=red]£70

Please click HERE (http://www.mvpmotorsports.com/Templates/frmTemplateH.asp?SubFolderID=1037) to see all of the above products in great detail.
Ignore the price on the link above! The above link is for reference and information on each part to help answer any questions and see pictures. If you have any questions about any product not answered in the above link please ask me!

I am sure I have forgotten a few things so please post any related questions here to help everyone understand this new and exciting program!

Cheers,

Dusty

[Alex]

Great prices there Dusty...

December is going to be expensive :sly:

[Terry S]

Damn, you werent kidding were you:eek: :thumbs:

[dude]

Dusty is your last name Claus by any chance and first name Santa ??????

Dude:flame Dev

[V8 Killer]

Originally posted by dude
Dusty is your last name Claus by any chance and first name Santa ??????


LOL, I wish it was! Imagine the women he must get! :)

If anyone has any questions just let me know please.

Regards,

Dusty

[tbourner]

Is that Blitz SUS air intake a metallic filter?


It looks a lot like mine, and I've been wondering what mine is for ages!!

[V8 Killer]

Originally posted by tbourner
Is that Blitz SUS air intake a metallic filter?


It looks a lot like mine, and I've been wondering what mine is for ages!!


The Blitz SUS is a stainless steel filter, yes. Part of the reason it cost so much compared to other intakes.

Regards,

Dusty

[tbourner]

Cool I'd better update my sig then!!

[osso]

Hi Dusty,

How does the Greddy 3-row FMIC compare to the HKS S Type and the HKS R Type in terms of spec and size?


Cheers
James

[V8 Killer]

Here are the core dimensions on the IC's you ask about. I measured them all myself.

Type R: 23.62 x 12 x 3.88 = 1100 cubic inches

Type S: 23.62 x 12 x 2.6 = 737 cubic inches

Greddy 3 Row: 23.25 x 11.88 x 4 = 1105 cubic inches

The Type S and Type R both come with only 3 pipes, all of them dull looking steel. You still have to purchase the additional 2 pipes if you are on stock twins. This will cost you $159 more. Also, the 2 additional pipes are polished aluminum which does not match the 3 pipes that are included with the Type S or Type R.
The 3-row includes all 5 pipes for the stock twins and all of them are beautifully polished.

The Type S nor the Type R comes with the needed smaller overflow tank. I sell it separately for $48.
The 3-row includes this overflow tank.

The Type S is dull and needs polishing if you want it to look as nice as it possibly could (as well as the 3 included pipes as previously mentioned).
The entire 3-row kit is polished to a mirror finish, it is one of the absolute nicest polishing jobs I have ever seen on an off-the-shelf product. The core, end tanks, & piping are all gorgeous.

The Type S is rated to efficiently support 550hp. I'm fully aware that there are Supras making 700rwhp (and probably more) on the Type S. The key here is efficiently. If the customer would change out the 3-row they could pick up flow and power. The Type S uses 2.5" piping but the 3-row uses 3".

The Type R and 3-Row are very similar in efficiency, so there is not really a debate there as to which is better.

Regards,

Dusty

[Alex]

The 3Row is roughly 600x300x100mm...the Type-S is 600x300x65 and the Type-R is 600x300x97.

The Type-R is rated as being good for upto 800bhp...so as you can see the GReddy 3ROW is certainly big enough to handle pretty much anything. And it's really at a fantasic price...obviously there are differences in contruction between the two makes but unless your pushing over 700hp can't see you needing anything better than a GReddy 3Row.

HTH

EDIT - DOH Dusty beat me!

[qaisar]

Great prices as always Dusty :thumbs:

Guys ive mentioned this before elsewhere but incase there are any people hesitant about ordering from abroad Dusty definately gets my recommendation for price and customer service based on past dealings

[dandan]

Agreed. Top class service!

[tbourner]

Yep me too.

[Chipmunk]

Hi Dusty ,

Did you ever have any joy in resourcing a good set of clear rear sidemarkers ?

Cheers
George

[osso]

I am very tempted to go for the Greddy.

I am only running on stock turbo's at the moment, but might consider going single next year. would the greddy 3 row increase turbo lag running on stock turbos? and where would the coolant tank go if you installed the Greddy 3 row FMIC?

The AEM Wide-Band UEGO Kit with 52mm Gauge is tempting too, great prices! Does the Wide band kit include everything you need including the wideband o2 sensor? might sound like a silly question but i've seen some kits where the sensor isnt included.

Cheers

[tbourner]

Stop mentioning things!! you're making me want a Greddy now as well!! (It's currently 7th on my list of things to do!!).

[dandan]

The 3 row is tempting me too! Just trying to decide whether I can spare the cash!

Don't suppose there'd be any more discount if I bought a 3 row and a Nur would there Dusty! :)

[SimonB]

Originally posted by osso
I am very tempted to go for the Greddy.

I am only running on stock turbo's at the moment, but might consider going single next year. would the greddy 3 row increase turbo lag running on stock turbos? and where would the coolant tank go if you installed the Greddy 3 row FMIC?

The AEM Wide-Band UEGO Kit with 52mm Gauge is tempting too, great prices! Does the Wide band kit include everything you need including the wideband o2 sensor? might sound like a silly question but i've seen some kits where the sensor isnt included.

Cheers

I can answer a few of those for you since I'm in a helpful mood :). First, the Greddy manual you can find here (http://www.mkiv.com/techarticles/greddy_fmic_manual/greddy3row.pdf). The AEM WBs do indeed come with the sensor, they use a Bosch sensor (I've got one without the gauge on order to plug in my E01).

Personally I don't know why everyone goes for the Greddy FMICs, the Blitz one is cheaper, bigger and very well made. Bit harder to install maybe and you have to polish the pipes if you so wish. I have a Blitz FMIC and there is no extra lag that I can notice, I would think the Greddy would be the same.

[Terry S]

Guys the GReddy 3 Row is the best choice as it will match straight up to the BL single kits, so is future proof. Awesome price on it too.

[V8 Killer]

Thanks Simon for the help! :)

The AEM does come with the sensor and EVERYTHING you need to install. For future reference that is in the description on the page I linked.

HERE (http://www.mvpmotorsports.com/Templates/frmTemplateH.asp?SubFolderID=1037) is that link again for everyone's convenience.

For the 3-row there is no detectable turbo lag at all. Same with the Blitz.

One thing Simon was incorrect on.
The Blitz measures exactly 24.02 x 10.47 x 4.02 = 1011 cubic inches. It is about 9% smaller than the Type R and the 3-Row.

I carry all the FMIC's discussed here and all of them have their strengths and weaknesses.

Regards,

Dusty

[V8 Killer]

Sorry but there is no further discount no matter how much you buy on the Specials listed. If I discounted it anymore I would be paying you to take it off my hands! :)

I will not be repeating all of these prices or specials again. At the end of December these prices are gone and to be fair to those that did take advantage of the specials I will not be able to repeat these prices at a later time. Unless of course we decide to put the same product back on special but that would be months and months from now.

Take advantage of these prices while you can please!

Regards,

Dusty

[dandan]

I thought so but hey... no harm in asking! :) :)

ps I'll be back over to Houston before and after xmas Dusty so will probably be pestering you for more bits again!

[Chipmunk]

Originally posted by Chipmunk
Hi Dusty ,

Did you ever have any joy in resourcing a good set of clear rear sidemarkers ?

Cheers
George


:confused:

[V8 Killer]

I have not received any good sets of front or rear sidemarkers in about the last 3 months. My stocking supply is exhausted and I am not confident on when I will receive more goods ones.

Could be tomorrow, could be never. :(

Regards,

Dusty

[Homer]

That price for the Greddy FMIC is far too tempting - u have mail!

[V8 Killer]

Thanks Homer!

All emails answered.

Cheers,

Dusty

[V8 Killer]

All emails answered. All PM's answered.

I have several orders already, thank you everyone!

If you are thinking about doing it just try it out! Buy just 1 or 2 things first time, give it a go! You know you want to give yourself a Christmas present too! :)

We are on schedule to ship December 15th from the USA.

Cheers,

Dusty

[dandan]

Sent you a couple of emails Dusty regarding Nur Spec, PHR Rad pipe, SSQV, B+M Shifter, Mikalor clamps and the 3 row as well as several stock Toyota parts.

[V8 Killer]

Thanks Dan, email answered!

Regards,

Dusty

[V8 Killer]

Only 1 week left before we ship...get your orders in soon please!!

[dandan]

Getting a final list together for you now Dusty...

[paul mac]

dusty
e-mailed you about blitz de-cat pipe and hks bov flange, dont let the boat go without em mate

[V8 Killer]

Email sent Paul.

Regards,

Dusty

[lightwave]

Hi Dusty!

How's this all going? Is there another one planned for shipping in January? :D

[V8 Killer]

Hi Dusty!

How's this all going? Is there another one planned for shipping in January? :D


All the parts were delivered yesterday to the UK. I have emailed my friend and I am waiting his response.

There were a couple of parts missing from this shipment, I will contact everyone effected privately via email.

There will be another shipment going out around January 31st, give or take. The exact date is not decided yet, I'll work on it right after Christmas.

Cheers,

Dusty

[lightwave]

There will be another shipment going out around January 31st, give or take. The exact date is not decided yet, I'll work on it right after Christmas.

Cheers,

Dusty

Hooray! I'll hold onto my Christmas money then. :) I hope the next list has wonderful, irresistable bargains. And I wish I had more money.

Yay. :eyebrows:

[Soonto"HAS"soop]

Cool my stuff is nearly here!! YAY!!

Dusty I have been emailing you about the TM Engineering rear bushes. Can you email me a price for them to be shipped in the next mass batch? Thanks mate!

Also does this kit include the rear subframe bushes?

Ben..