Guigsy Posted July 3, 2013 Share Posted July 3, 2013 Hi all. On the front bumper there are 6 strips of alloy that hold the plastic strip at the bottom of the bumper onto the bumper it's self. 3 top, 3 bottom Anyone know these part bumpers and rough cost? I don't have 45 mins in my lunch break for Toyota to order the wrong parts. Lol Quote Link to comment Share on other sites More sharing options...
Graham1984 Posted July 3, 2013 Share Posted July 3, 2013 Pm Nic as he would be the man to ask. Quote Link to comment Share on other sites More sharing options...
Nic Posted July 3, 2013 Share Posted July 3, 2013 Can't remember which parts you mean, are they shown on here? http://img849.imageshack.us/img849/6688/nngw.jpg Quote Link to comment Share on other sites More sharing options...
mellonman Posted July 3, 2013 Share Posted July 3, 2013 i think he is on about the ones that attach the lip Quote Link to comment Share on other sites More sharing options...
Guigsy Posted July 3, 2013 Author Share Posted July 3, 2013 Not quite nic. It's hard to explain The bumper has a black plastic lip on the bottom. It's held onto the bottom of the bumper with 4 bolts on each side. Then I think 4/5 down the middle. But to keep it in place there is a strip of metal (aluminium) that acts like a giant washer. So you can't see them unless your under the car. There is one above between the bolt head and the bumper and another below the plastic lip and the nut. So metal - bumper - lip - metal with a bolt through it. There is a strip each side. Both are about a foot long, maybe half an inch wide and curved to fit the curve of the bumper. Then one along the front of the bumper which is flatter and longer. So there are 6 pieces in total. They are grooved on one side. They are definately Toyota as they have been on my other car and they have bolts with a square head in them so they don't twist out of the groove they sit in. I could reuse mine but they are buckled and broken and the bolt holes in my bumper are all pulled out apart from 3. And if I had a full set of these metal things I'd be set. I can get some pics later Quote Link to comment Share on other sites More sharing options...
Nic Posted July 3, 2013 Share Posted July 3, 2013 ? http://img402.imageshack.us/img402/6668/nxmo.jpg http://img856.imageshack.us/img856/3600/8l1r.jpg Quote Link to comment Share on other sites More sharing options...
Guigsy Posted July 3, 2013 Author Share Posted July 3, 2013 That's them on the first pic. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.