Matt _Aero top_ Posted June 17, 2013 Share Posted June 17, 2013 Hi folks How was the original OEM bodykit a held on ? Are they rivets ? Thanks Matt Quote Link to comment Share on other sites More sharing options...
Supra Gaz Posted June 17, 2013 Share Posted June 17, 2013 Clip in type things and bolts, which parts in particular? Quote Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted June 17, 2013 Author Share Posted June 17, 2013 Rear spats and side skirts , the fastners under the car where the side skirt folds under the sill Quote Link to comment Share on other sites More sharing options...
DaveR Posted June 17, 2013 Share Posted June 17, 2013 I think they're held on by some sort of captive bolts and washers... Quote Link to comment Share on other sites More sharing options...
jonc Posted June 17, 2013 Share Posted June 17, 2013 Mostly screws into plastic inserts which clip into the sill bodywork. As the years wear on the plastic insert clips break (through going brittle) and the screws just turn the inserts when you are trying to undo them. They are all Toyota part numbers which you can still buy from Mr.T http://www.toyodiy.com/parts/p_J_1998_TOYOTA_SUPRA_JZA80-ALPVZ_7503.html Part numbers are under the heading CLIP, ROCKER PANEL MOULDING 75867-14070. If i remember the rightly the OEM skirts (Actual OEM) use the same fastenings as the black OEM sill covers/ Hope this helps Quote Link to comment Share on other sites More sharing options...
Josh42 Posted June 17, 2013 Share Posted June 17, 2013 Mostly screws into plastic inserts which clip into the sill bodywork. As the years wear on the plastic insert clips break (through going brittle) and the screws just turn the inserts when you are trying to undo them. They are all Toyota part numbers which you can still buy from Mr.T http://www.toyodiy.com/parts/p_J_1998_TOYOTA_SUPRA_JZA80-ALPVZ_7503.html Part numbers are under the heading CLIP, ROCKER PANEL MOULDING 75867-14070. If i remember the rightly the OEM skirts (Actual OEM) use the same fastenings as the black OEM sill covers/ Hope this helps I love you for posting this! It happened to me this weekend when trying to undo the screws! Thanks! Quote Link to comment Share on other sites More sharing options...
Matt _Aero top_ Posted June 17, 2013 Author Share Posted June 17, 2013 They look like rounded rivet heads or something fastening the skirts to under the car , They must have been taken off sometime in the past , Looks like ill be drilling them out Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.