Noz Posted June 14, 2013 Share Posted June 14, 2013 Having a C West bumper, my indicator mount is above the unit and not behind. The facelift indicators need custom frame made to suit this. I made some brackets, but they only had 1 mounting point and they keep revolving. So, I'm going for a different look. I'm going to introduce some LED lights on the front. But I want them hidden until flashing. My idea is to use LED's on a strip which is well positioned. I have some plastic left from my splitter, I'll drill and wire this. Has anyone else had any custom front light conversions. I've seen Hecklers before, they look pretty good. But I want something more descreet. I'm also mounting some on the side. As my wings don't have mounting points. All ideas, and photos really welcome here for some ideas. I need to do this ASAP so I'll be ordering some LED's sometime today. Quote Link to comment Share on other sites More sharing options...
Carbon_Bullet Posted June 14, 2013 Share Posted June 14, 2013 Me Quote Link to comment Share on other sites More sharing options...
Noz Posted June 14, 2013 Author Share Posted June 14, 2013 You have a custom setup already Chris? I'm thinking about a hidden single strip tucked up where the old ones lived. I've ordered the LED's. Resistor's inline with pre soldered wires. Ordered some male/female crimps. Should be the easiest indicator setup possible! Quote Link to comment Share on other sites More sharing options...
Carbon_Bullet Posted June 14, 2013 Share Posted June 14, 2013 Yeah I asked heckler to make mine, ill get pictures, using stock clear lenses with a circular strip of white LEDs for sidelights and orange strip through the middle for indicator Quote Link to comment Share on other sites More sharing options...
Carbon_Bullet Posted June 14, 2013 Share Posted June 14, 2013 Check Littlers build thread there's a pic of similar made ones in there Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.