Toyota thread sizes, file,tap and die

All after doing some work on my rear hubs i found that some of my threads to the supension bolts where getting a little poor , so next time i work on them i want to clean all the threads up to make things go alot smoother when i next work on them , but i remember something about it being a funny thread size

does anyone know what the toyota thread type is ?

i was looking to get a kit like this http://www.ebay.co.uk/itm/42pc-Re-Thread-Tool-Kit-Set-UNC-UNF-and-Metric-Sizes-Taps-Dies-and-Files-New-/400359000710?pt=UK_Hand_Tools_Equipment&hash=item5d37418a86#ht_3222wt_1018

Metric is what you'll need but it would appear there are a few non standard

sizes.

What i mean is larger diameters with finer pitch threads which the tap and die

set won't have in it.

As far as any bolts go just clean them with a wire wheel on a bench mounted

motor or even in a drill

nice one dunk,

maybe one of the files will have the finer pitch i wouldnt know but seems a very handy bit of kit to have on hand

The set in that link is UNF AND UNC. You wont metric and metric fine.

nice one dunk,

maybe one of the files will have the finer pitch i wouldnt know but seems a very handy bit of kit to have on hand

Don't bother with files, a wire wheel will clean the threads up no problem

and if it doesn't then you really need new bolts or nuts in my opinion