Slutters Posted March 19, 2013 Share Posted March 19, 2013 Hi guys Just finished building up the Supra gone single turbo and aiming for 650-700BHP on AEM managment. I had originally lined up Ryan to map the car for me but this will not be possible for the foreseeable future as he has so much work with his Syvecs unit's. Ryan has passed me on to a guy called Dan Turner to map it, however i wanted any other suggestions if you guys have any? I am based Peterborough but am willing to travel for the right mapper. Thanks Quote Link to comment Share on other sites More sharing options...
sideexitsupra Posted March 19, 2013 Share Posted March 19, 2013 If Ryan has given you a recommendation, I would go with that. Quote Link to comment Share on other sites More sharing options...
tooquicktostop Posted March 19, 2013 Share Posted March 19, 2013 Is yours a 6 speed Quote Link to comment Share on other sites More sharing options...
Slutters Posted March 19, 2013 Author Share Posted March 19, 2013 Is yours a 6 speed Yes it is, spec is: Cast T4 Manifold 1000CC Low Imp Delphi Injectors Injector Clinic Rail 4" Downpipe Holset HX52 1000CC low imp precision injectors with Resistor pack HKS DIL AEM 5 Bar Map AEM IAT AEM Boost Control Solenoid Stock Motor Walbro 450 AEM V1 Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted March 19, 2013 Share Posted March 19, 2013 Will stock motor take 700? Any cams Quote Link to comment Share on other sites More sharing options...
Lee P Posted March 19, 2013 Share Posted March 19, 2013 As Ryan has already said Dan Turner for the AEM, he mapped my car many years ago on the AEM and was always very good. I have used his dyno as well and he has a very good setup there. - - - Updated - - - Will stock motor take 700? Any cams 700hp will be fine on the stock block but it is getting close to the safe limit of the rod bolts. Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted March 19, 2013 Share Posted March 19, 2013 nice to know that ^^^^ I have mapping in a few weeks time Quote Link to comment Share on other sites More sharing options...
Slutters Posted March 19, 2013 Author Share Posted March 19, 2013 Who are you using Shane? - - - Updated - - - Ahh.....Ireland.... Quote Link to comment Share on other sites More sharing options...
Ryan.G Posted March 20, 2013 Share Posted March 20, 2013 Just to confirm on this as imagined a thread would be started. I recommended speaking to Aem UK (dan turned) for recommendation for mapping. One guy who has redeemed himself and impressed me with Aem is also MB Automotive. 07903 358470 I can only apologies but being a director of Syvecs has big asks of me and I need to be seen just supporting our products and also if I don't develop stuff with pat we don't expand. Get ready to see some cracking products in 2013 Ryan Quote Link to comment Share on other sites More sharing options...
Guigsy Posted March 20, 2013 Share Posted March 20, 2013 I'm booked into dans place in a few weeks for some minor bits and bobs. He is in silverstone at advanced Motorsport & engineering. I bumped into him at a tyre place in daventry and was a nice friendly chap. Has been doing supras for years but I had no idea he was so close. He mapped davidp's supercharger conversion. He also has a hub dyno if your putting down serious power that a traditional rolling road won't handle. Quote Link to comment Share on other sites More sharing options...
Slutters Posted March 20, 2013 Author Share Posted March 20, 2013 Just to confirm on this as imagined a thread would be started. I recommended speaking to Aem UK (dan turned) for recommendation for mapping. One guy who has redeemed himself and impressed me with Aem is also MB Automotive. 07903 358470 I can only apologies but being a director of Syvecs has big asks of me and I need to be seen just supporting our products and also if I don't develop stuff with pat we don't expand. Get ready to see some cracking products in 2013 Ryan Hi Ryan Thanks for the email back this morning. I am going to go with Martin on your recommendation. Its going for mapping in April so will let you guys know how it goes! I will be leaving the car with Martin for a week so he can set it up and i like the fact he can take his time with it. Will keep you all posted! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.