_Shane_ Posted February 17, 2013 Share Posted February 17, 2013 Well i got the turbo kit removed last weekend and this weekend i got the bay stripped as much as i could and prepped it before it was to be sprayed We wrapped every single wire/loom/exposed part, took awhile to do but def worth taking your time. The loom was removed where possible I decided to use a different ground coat to give the engine bay a richer creamier pearl finish rather than the same pearl as outside. The top coat used was Lamborghini balloon white as per exterior but the base coat was a different color. Plus keeping a completely white bay clean might prove a bit difficult Also sprayed the stock fan shroud a gloss black while i had it removed The end result is i am delighted with the color, its a really nice color and will complement the bay well when the T51 kit is fitted These are some pics i took throughout the day. Would advise not going out on the p!ss the night before Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted February 17, 2013 Author Share Posted February 17, 2013 Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted February 17, 2013 Author Share Posted February 17, 2013 Quote Link to comment Share on other sites More sharing options...
broomie Posted February 17, 2013 Share Posted February 17, 2013 looking good, proper brave move on the kit! is it the border kit? Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted February 17, 2013 Author Share Posted February 17, 2013 Full BN Sports kit This is it before i got it http://www.speedhunters.com/2009/04/car_spotlight_gt_gt_bn_sports_kitted_supra/ Some fool then removed the BN wing Quote Link to comment Share on other sites More sharing options...
buster Posted February 17, 2013 Share Posted February 17, 2013 Good work bud looks like it's going to have a happy ending interested to see the end product Quote Link to comment Share on other sites More sharing options...
listy Posted February 17, 2013 Share Posted February 17, 2013 Looking good Quote Link to comment Share on other sites More sharing options...
broomie Posted February 17, 2013 Share Posted February 17, 2013 watch out for kerbs! Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted February 17, 2013 Author Share Posted February 17, 2013 Thanks guys Its been left to dry over night now and i will be removing all the masking tape tomorrow and start putting things back together will put up some new pics then Quote Link to comment Share on other sites More sharing options...
broomie Posted February 17, 2013 Share Posted February 17, 2013 like this Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted February 17, 2013 Author Share Posted February 17, 2013 its fair low as it mate so wont be adding any lips on to it, centers of the wheels are already black Quote Link to comment Share on other sites More sharing options...
broomie Posted February 17, 2013 Share Posted February 17, 2013 i get what your saying, but it would not only look good it would protect the kit - - - Updated - - - that colour looks the nuts btw Quote Link to comment Share on other sites More sharing options...
broomie Posted February 17, 2013 Share Posted February 17, 2013 this is as close as i can get to the colour Quote Link to comment Share on other sites More sharing options...
buster Posted February 17, 2013 Share Posted February 17, 2013 Pics? Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted February 17, 2013 Author Share Posted February 17, 2013 Pics? ???? I just posted 52 last night Quote Link to comment Share on other sites More sharing options...
buster Posted February 17, 2013 Share Posted February 17, 2013 I want to see it after the masking is off think its going to look very clean Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted February 17, 2013 Author Share Posted February 17, 2013 Removed all the masking earlier today and pushed the front of it outside the garage to check it out in the light. Started putting parts back together then this evening, will upload a few new pics in a bit and show the progress there Quote Link to comment Share on other sites More sharing options...
Slutters Posted February 17, 2013 Share Posted February 17, 2013 Looking good mate, fair play! Quote Link to comment Share on other sites More sharing options...
DannoSupra Posted February 17, 2013 Share Posted February 17, 2013 Keep up the good work fella! Quote Link to comment Share on other sites More sharing options...
Luxluc Posted February 18, 2013 Share Posted February 18, 2013 Massive improvement mate. Great work. Quote Link to comment Share on other sites More sharing options...
Clausz Posted February 18, 2013 Share Posted February 18, 2013 Great result Shane. That looks much better now! Quote Link to comment Share on other sites More sharing options...
Suprakeith Posted February 18, 2013 Share Posted February 18, 2013 Looks really good be good to see it when all parts back in Quote Link to comment Share on other sites More sharing options...
buster Posted February 19, 2013 Share Posted February 19, 2013 It's not till you take everything out you see just how many holes mr t put in the engine bay Looks good bud hope your happy with the result so far Quote Link to comment Share on other sites More sharing options...
mplavery Posted February 20, 2013 Share Posted February 20, 2013 Looking very nice indeed buddy ! Quote Link to comment Share on other sites More sharing options...
Brazil Posted February 20, 2013 Share Posted February 20, 2013 Great job, looks a million times better. Just food for thought could you not modify the back bumper and cut the lower part of it, the bit that sticks back out? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.