Jump to content
The mkiv Supra Owners Club

Spec list so far for my build, have I missed anything?


Parry_10
 Share

Recommended Posts

Ok so my goal is to make 700fwhp with a rev limit of 7200-7500rpm.

 

Here is a list of things I have so far that come to mind may have missed a few bits here and there. If something isnt on the list that you think I will need let me know:

 

Nur motorsport Carbon fibre rear arches, 50mm wider each side.

Nur motorsport Carbon front arches, 40mm wider each side.

Hybrid Full Carbon Doors

Seibon Full Carbon Tailgate

RMM front spoiler

Facelift front & rear lights

Clear indicators

Stubby aerial

Zunsport Front Grille

Custom bonnet vents, aerocatches

Ridox carbon boot lip

Tein flex coilovers

Fiske alloys

 

Stock bottom end (only done 60k) - its been compression tested

6 speed v160 gearbox- (again done 60k)

6 speed big case prop

Big case UK spec auto LSD with correct shafts

TT6 engine loom

6 speed flywheel

Garage whifbitz adjustable cam pulleys

SRD twin electric fan kit

Polished cam covers with custom -12 breathers and braided lines with fittings

SRD alumimum undertray

Greddy pulley set

Twin bosche 044 in tank fuel pump set up

Whifbitz id1000 injector and fuel rail set up

Twin fuel filter set up with braided lines aero fittings etc

Aeromotive FPR

Line lock kit

Whifbitz 4" exhaust

Nardi steering wheel with boss and quick release hub

Greddy 4” fmic

SRD alloy radiator

Billet timing belt tensioner

Titan crank Pulley

Carbon fibre slam panel

Carbon fibre spark plug cover

Stage 2 head- Fully ported+polished, brian crower ti springs and retainers, new teflon coated valve stem seals

ARP headstuds

All gaskets new toyota gaskets inc headgasket

Greddy intake manifold- fully port matched

Q45 throttle body 90mm

KAD brakes with upgraded stainless pistons and new seals- AP racing 356mm discs

Comp turbo- 6765 billet, .81ar, 3”v band

T4 turbo blanket

PHR downpipe and midpipe 3”

PHR turbo oil lines

HKS 60mm wastegate

HKS exhaust manifold

Syvecs toucan screen

All syvecs sensors

Mocal/SRD oil cooler kit and power steering cooler

HKS ssqv bov

 

I think all I have left to buy is:

 

Syvecs ecu

Clutch

Cams

Seats

ngk racing sparkplugs

Edited by Parry_10 (see edit history)
Link to comment
Share on other sites

You will need irridium grade 8 or 9 or go for the racing ones Jamie P always recommends

You may also want to consider new coil packs and clips as higher power and boost tend to highlight faults eg misfires on older items.

Good luck with build - looks like another great supra in the making

Link to comment
Share on other sites

You will need irridium grade 8 or 9 or go for the racing ones Jamie P always recommends

You may also want to consider new coil packs and clips as higher power and boost tend to highlight faults eg misfires on older items.

Good luck with build - looks like another great supra in the making

 

Yes will be getting the ngk racing plugs cheers:) got a set of low mileage coilpacks which I will try for the time being.

Link to comment
Share on other sites

You will want a new OEM oil and water pump and I would recommend getting a new crank pulley whilst you are there.

 

Got a titan crank pulley. Oil pump is low miles and had new front seal recently and the bottom end is mint. Water pump is new basically

 

The plugs are the NGK r7436-9's, also get yourself some heat wrapping and a turbo blanket.

 

However, isn't 700RWHP a little optimistic on that turbo?

 

Ok cheers, got turbo blanket. Will be getting heat wrap for the turbo and wastegate lines. HKS manifold is already heat wrapped. And its 700FWHP mate not RWHP, not optimistic at all:)

Link to comment
Share on other sites

Nice setup. But I believe You will definitely need :

 

1- New oem oil and water pump

2- arp L19 or 625+ headstuds otherwise head will lift

3- Ati crank pulley will be good idea

4- depending on the boost, you might need hks dli or motec cdi-8 for ignition

5- I prefer Tial bov instead of Hks.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.