Jump to content
The mkiv Supra Owners Club

Help please rota gtr-d wheels for my car


Oddball87
 Share

Recommended Posts

Hi all, before I order a set I need a bit of help with the sizes please. I will be running 18 x 12j at the rear but I am unsure what size on the front? Will 9.5j be ok? Plus what offset? I will have nur Motorsport arches fitted. Cheers matt

 

If you have wheel arches, I would probably go with a 18x10 +35 call ben at rarewheels and see what he thinks, they were super helpful when I did my setup

Link to comment
Share on other sites

ET 20 sounds about right on nur rear arches in that width, you need the wheels before you fit the arch as you can move them about when mounting to get the perfect fitment to the wheel. :) You can squeeze a 13j under there though!

 

Exactly what I done. When I first rivited the arches on before actuall bonding them when I first lined the wheels up they were well off. Also regarding the 13J fitment wheres a good place to find that wheel of that width? Ive searched but cant find anywhere :shrug:

Link to comment
Share on other sites

ET 20 sounds about right on nur rear arches in that width, you need the wheels before you fit the arch as you can move them about when mounting to get the perfect fitment to the wheel. :) You can squeeze a 13j under there though!

 

Ok cheers. I will order them tomorrow. Ya cant do anymore on the arches untill i have them. Cheers lads

Link to comment
Share on other sites

I want to order my tires at the same time. What dose anyone reckon mend? I was thinking 335/30/18 or 315/30/18 R888. cheers matt

 

I was gunno upgrade from my Yokahama 315/30/18s soon to 335/30/18 r888s. I havent checked but I assume they would fit ok.

Link to comment
Share on other sites

I was gunno upgrade from my Yokahama 315/30/18s soon to 335/30/18 r888s. I havent checked but I assume they would fit ok.

 

Anyone?

 

Yes they will fit! I run 20mm spacers on the rears also with the 12j wheel and theres still plenty of room. Just get the 335s

Link to comment
Share on other sites

Sorry for the hijack, but what is the perfect offset etc to fill stock arches front and back... Not keen on the wheels being inside the arches thanks.

 

I have Rota GTR-D Back 18x10j et25 with Falken452 265 and Rota GTR front 18x9.5j et35 with Falken452 245 and they fill stock arches. All in £1300 odd from Paul at Whifbitz.

 

Pop over and have a look if you like mate, I've already offered to let Jamie (Fosta) try them on for size.

 

We can't all have the same wheels in the North East though, it's gonna be a Rota club up here. :blink:

Link to comment
Share on other sites

I have Rota GTR-D Back 18x10j et25 with Falken452 265 and Rota GTR front 18x9.5j et35 with Falken452 245 and they fill stock arches. All in £1300 odd from Paul at Whifbitz.

 

Can you post up a couple pics mate? I was considering these wheels for mine, would like to see how yours look in stock arches. Is your car lowered or stock height? And are the GTR-D available with concave? Be either those or the GTR concaved, or Force concaved.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.