Part number for white bonnet release cable block

As per title really, I'm looking for the part number for the white block that splits the bonnet release cable from the cabin into the two cables that go to the two latches. This is the white block situated in the top of the front bumper.

The garage the carried out my MOT managed to brake the white block and now the bonnet is stuck shut.

Thanks,

Steven.

I can't remember which part you mean but here is the EPC diagram

http://imageshack.us/a/img259/3196/picture1lg.jpg

To be honest, from looking at the diagram I don't think it's even available seperate to the cable

I have a good one here if you want it, probably take a couple of days to get to you though.

Thanks Nic.

It's hard to tell from that picture but I believe its part number 90467-06107-01. But after the part number is "(2)" which suggest you need to order two when replacing, this isn't the case with the white block as there is only one.

Possibly it comes as part of the cable part numbers, can anyone shed any light on this?

That part number is for a pair of screws mate, possibly those that hold the block in place.

If it's described as a standard part it's a safe bet it's only a screw or some other form of fastener.

You have to buy the whole cable from car back