WaLKeRR Posted October 10, 2012 Share Posted October 10, 2012 Hey guys!, ive got an emanage blue, but there is no wire to connect it upto a computer can you buy this online anywhere or make one? also who would be the best place to get it all mapped up at im from manchester area but are wiling to travel say 100miles in any direction, but i heard you need a base map would anyone have one of these? thanks Rob Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 10, 2012 Share Posted October 10, 2012 Its a long time since i played with either the blue or the ultimate, but i seem to remember that the cable for the blue is a special dedicated cable with some circuitry so you cant use just any USB like the ultimate, i don't know of anyone who map's these anymore, and there is no such thing as a base map for them, you create your own according to you upgrades, . Quote Link to comment Share on other sites More sharing options...
WaLKeRR Posted October 10, 2012 Author Share Posted October 10, 2012 Its for an na-t im sure there is a basic map though so that it can read boost then it could be taken to a dyno to be properly tuned Quote Link to comment Share on other sites More sharing options...
heckler Posted October 10, 2012 Share Posted October 10, 2012 http://www.aliexpress.com/item/Data-Communication-Cable-for-E-Manage-blue/332658572.html this is what you need. Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted October 10, 2012 Share Posted October 10, 2012 No basic map, you tell it what sort of sensor is being used AFM or MAP, the size of the injectors and lag, which is just the basics, but your best bet is to not set these and just drive it off boost to the mapper and let him sort it. Quote Link to comment Share on other sites More sharing options...
WaLKeRR Posted October 10, 2012 Author Share Posted October 10, 2012 50 dollers cha ching! lol, and so you reckon best bet is to take it to a mapper and let him sort everything out, i just thought it would be better to make sure the car ran semi okay before getting it mapped Quote Link to comment Share on other sites More sharing options...
heckler Posted October 10, 2012 Share Posted October 10, 2012 50 dollers cha ching! lol, and so you reckon best bet is to take it to a mapper and let him sort everything out, i just thought it would be better to make sure the car ran semi okay before getting it mapped yup. but its the only way to interface with a USB port. Generic USB/serial cables dont work. Been there, seen it, done it. Unless you or the mapper uses a laptop with a 9 pin serial cable. Yes, deffo better just take it to the mapper and let them sort it out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.