a98pmalcolm Posted August 22, 2012 Share Posted August 22, 2012 (edited) Hay all. Ok finally got the car finished today. I need to do some exhaust modification but all is done and the car runs. Many bumps on the way with not having all the corrects parts but a massive thanks to Ryan G and Paul Whifin for the help and advise. Sorry on the lack of pictures towards the end of the build, I just didn't have time to take them. The spec: 6766 DBB Precision Turbo Whifbitz Twin Waste Gate Manifold Twin Trial Waste Gates With Screamers EGT Sensor All Gubins to complete Conversion Ok Turned up at my mates workshop, my 1st job was to remove bumper, inlet parts and headlights http://img715.imageshack.us/img715/7436/20120820103550.jpg My Next job was to fit the 450 fuel pump and remove the 255 http://img839.imageshack.us/img839/5164/20120820112025.jpg http://img443.imageshack.us/img443/5482/20120820112036.jpg Time for lunch and a sneaky pic of the car http://img824.imageshack.us/img824/1617/20120820141857.jpg Ok next thing I had to removed exhaust system http://img577.imageshack.us/img577/8864/20120820145036.jpg Time to start striping old turbo boost pipes and remove turbos http://img843.imageshack.us/img843/8475/20120820182346.jpg Me and Alex removed all the old oil lines and brackets for the old turbos http://img31.imageshack.us/img31/7105/20120820192745.jpg With the Whifbitz manifold in place time to fit new studs and see how the turbo looks http://img222.imageshack.us/img222/9903/20120820204124.jpg And with the turbo being able to support it self http://img819.imageshack.us/img819/3060/20120820204528.jpg While Alex was away for a few hours doing an wheel alignment I had to link up all vacuum pipes and get the little bits done here and there. http://img862.imageshack.us/img862/4148/20120822132447.jpg Exhaust on and screamers fitted. You can see the exhaust needs to be lifted higher. http://img401.imageshack.us/img401/2259/20120822160617.jpg http://img809.imageshack.us/img809/7858/20120822160627.jpg http://img823.imageshack.us/img823/5617/20120822161052.jpg I had to angle grind this bracket for the screamer to fit nicely http://img31.imageshack.us/img31/3102/20120822161113.jpg A shot of one of the wastgates http://img820.imageshack.us/img820/1627/20120822161121.jpg And Finally the finished product http://img109.imageshack.us/img109/2991/20120822171141.jpg A video of the 1st start up. What a great feeling no issues as at all And a small vid of what it sounds like at low boost. I have to be careful as its not mapped yet. But it sounds immense in person Thanks for reading. Hope you enjoyed. Next up.. Custom Dash2 Display. Edited August 22, 2012 by a98pmalcolm (see edit history) Quote Link to comment Share on other sites More sharing options...
Jamesy Posted August 22, 2012 Share Posted August 22, 2012 Looks great mate nice work, nice spec Quote Link to comment Share on other sites More sharing options...
dan294 Posted August 22, 2012 Share Posted August 22, 2012 Awesome Paul, more pics and vids needed! Quote Link to comment Share on other sites More sharing options...
tkddav3 Posted August 22, 2012 Share Posted August 22, 2012 looks and sounds epic! whens mapping? Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted August 22, 2012 Author Share Posted August 22, 2012 Thanks guys looks and sounds epic! whens mapping? I'm awaiting a date from Ryan. I really messed him about unintentionally and I feel a total douche but hes still fine with re booking me in. What a top fella.. Quote Link to comment Share on other sites More sharing options...
Chris Bailey Posted August 22, 2012 Share Posted August 22, 2012 AMAZING!!! I can tell from that second video that its gonna be fast Nice work mate Quote Link to comment Share on other sites More sharing options...
dan294 Posted August 22, 2012 Share Posted August 22, 2012 What you aiming for ultimately? Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted August 22, 2012 Author Share Posted August 22, 2012 should be about 600BHP Quote Link to comment Share on other sites More sharing options...
tkddav3 Posted August 22, 2012 Share Posted August 22, 2012 is that jamies turbo from his last set up? i bet you could get alot more than that after some engine work Quote Link to comment Share on other sites More sharing options...
Chris Bailey Posted August 22, 2012 Share Posted August 22, 2012 is that jamies turbo from his last set up? i bet you could get alot more than that after some engine work Well done doofus! Quote Link to comment Share on other sites More sharing options...
andz222 Posted August 22, 2012 Share Posted August 22, 2012 nice;) Quote Link to comment Share on other sites More sharing options...
Callaway Motorsport Posted August 22, 2012 Share Posted August 22, 2012 very nice mate, love the sound. Quote Link to comment Share on other sites More sharing options...
SPG Posted August 22, 2012 Share Posted August 22, 2012 Mate i reckon you want to be removing that breather filter on the cam-cover, i have heard of horror stories about oil leaking out of these and causing a fire hazard. Other than that it looks great buddy Quote Link to comment Share on other sites More sharing options...
RobD Posted August 22, 2012 Share Posted August 22, 2012 Hearing that noise makes me want to go single Quote Link to comment Share on other sites More sharing options...
l.chris97 Posted August 22, 2012 Share Posted August 22, 2012 v tidy car mate. Quote Link to comment Share on other sites More sharing options...
Samurai 20V Posted August 22, 2012 Share Posted August 22, 2012 Nice to see a Supra being built and not broken.. Good Luck! Quote Link to comment Share on other sites More sharing options...
a98pmalcolm Posted August 22, 2012 Author Share Posted August 22, 2012 Nice to see a Supra being built and not broken.. Good Luck! Thanks mate, its silly all these broken cars with people getting the GTR fever. GTR's will start to become more common than ants! Although on the plus side, it makes our Supras more unique. is that jamies turbo from his last set up? i bet you could get alot more than that after some engine work No mate this is the turbo he bought and didn't use due to wanting a quicker spool. It was going to so onto his Supra until he bought a GTR. But the wategates and manifold was from his set up. Quote Link to comment Share on other sites More sharing options...
_Shane_ Posted August 23, 2012 Share Posted August 23, 2012 what power ya hoping for mate, looks almost identical to my single setup Quote Link to comment Share on other sites More sharing options...
Luxluc Posted August 23, 2012 Share Posted August 23, 2012 Wow. Great work there. I didn't expect you to be that fast after you grabbed the turbo off Jamie. Congrats on the work mate Quote Link to comment Share on other sites More sharing options...
Hammer Posted August 23, 2012 Share Posted August 23, 2012 Good work, sounds great. Quote Link to comment Share on other sites More sharing options...
lui Posted August 23, 2012 Share Posted August 23, 2012 Nice work looks like your doing a great job mate Quote Link to comment Share on other sites More sharing options...
Sukhy Posted August 23, 2012 Share Posted August 23, 2012 Looking good.. Quote Link to comment Share on other sites More sharing options...
tooquicktostop Posted August 23, 2012 Share Posted August 23, 2012 Looks great and well done for doing it yourself and having no issues, saved yourself a few quid there. Quote Link to comment Share on other sites More sharing options...
mellonman Posted August 23, 2012 Share Posted August 23, 2012 Mate i reckon you want to be removing that breather filter on the cam-cover, i have heard of horror stories about oil leaking out of these and causing a fire hazard. Other than that it looks great buddy yeah that also you should of cranked it for longer to get oil in the lines you would be surprised how long you have to crank until oil comes out,thats just a note to others great job though looking good will be a nice result i bet Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted August 23, 2012 Share Posted August 23, 2012 Too many shiney things under the bonnet for my liking!! looks awesome mate, your going to love the single Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.