Supra N_A Posted June 27, 2012 Share Posted June 27, 2012 thinking of moving my bov to near my front bumper... who has done this and what size silicone T joiner are used??? just think atm on the stock TT its a poor place for it to be and hidden away Quote Link to comment Share on other sites More sharing options...
Nic Posted June 27, 2012 Share Posted June 27, 2012 Intercooler hard pipe kit and a weld on flange would be the best way of mounting it. Quote Link to comment Share on other sites More sharing options...
FOSTA Posted June 27, 2012 Share Posted June 27, 2012 Ive done this on my NA-T Quote Link to comment Share on other sites More sharing options...
Supra N_A Posted June 27, 2012 Author Share Posted June 27, 2012 Intercooler hard pipe kit and a weld on flange would be the best way of mounting it. this seems ok? http://www.ebay.co.uk/itm/SILICONE-COUPLER-T-HOSE-BOOST-PIPE-BOV-DUMP-VALVE-2-5-1-63MM-26MM-INTERCOOLER-/350527142700?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item519d0bbb2c#ht_879wt_1037 only thing is the bov is 19mm when this silicone t is 26mm think a good clip will keep it in place? Quote Link to comment Share on other sites More sharing options...
FOSTA Posted June 27, 2012 Share Posted June 27, 2012 Mate ring SFS performance hoses and mark will make you one up with the exact size you require. Just give me a text if you want me to pass the number over. The price will cost twice as much as that one though but atleast you can relax knowing you won't have a bov blow half way down the street as the hose was too big lol Quote Link to comment Share on other sites More sharing options...
Robzki Posted June 28, 2012 Share Posted June 28, 2012 Block off the stock location with 19mm id pipe and 19mm od plugs. Then relocate as nic said. I'm not entirely sure what you are trying to achieve. Most people have relocated to a hardpipe away from the stock location, a few have it near the front bumper can't see the appeal unless you have a show car or enjoy cleaning bovs. Quote Link to comment Share on other sites More sharing options...
TubbyTwo Posted June 28, 2012 Share Posted June 28, 2012 I thought the best location for the BOV was as close to the throttle body as possible? Quote Link to comment Share on other sites More sharing options...
Robzki Posted June 28, 2012 Share Posted June 28, 2012 If that was the case I'm not sure why Toyota made the mistake of putting it on the wrong side Also I'm just off out to fit my one on the ic pipework near the stock location, and I am always right. Quote Link to comment Share on other sites More sharing options...
TubbyTwo Posted June 28, 2012 Share Posted June 28, 2012 Quote Link to comment Share on other sites More sharing options...
Robzki Posted June 28, 2012 Share Posted June 28, 2012 Quote Link to comment Share on other sites More sharing options...
p3te Posted June 28, 2012 Share Posted June 28, 2012 do you have hard pipes on your fmic? weld on flange would probs be best Quote Link to comment Share on other sites More sharing options...
p3te Posted June 28, 2012 Share Posted June 28, 2012 i had a fitting welded on my pipework, here it is when i got it done Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.