Dim Sum Posted April 1, 2012 Share Posted April 1, 2012 I did a search and some were useful and some information i read, i already knew so i was wondering if i could get a fresh insight from the forum on this matter Okay today i took the stock airbox pipe out the one connecting from the airbox to the turbo pipe After putting it back on it won't boost over 0.65 of boost, at first i thought it must be that pipe that i took off and thought i didn't tighten it enough so got back and tighten it again and same thing happened. The turbo sounds like its spooling and very loud then pressure seems to leak i think. But the dump valve goes off I did noticed that a bit of rubber on the hose was chipped off but would that cause the leak? This part is end 65mm end that connects to the pipe turbo. Quote Link to comment Share on other sites More sharing options...
Dim Sum Posted April 2, 2012 Author Share Posted April 2, 2012 Another question is that would the stock air take pipe if not tighten probably will cause the leak?? Quote Link to comment Share on other sites More sharing options...
Dim Sum Posted April 3, 2012 Author Share Posted April 3, 2012 Anyone ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.