pjavon Posted April 1, 2012 Share Posted April 1, 2012 Can anyone tell me if all the afr sensors are M18x1.5 thread. I want to weld the bung in my manifold so I can wrap and fit it so I was hoping this would be OK to weld in and I'll sort my gauge out at a later date. Quote Link to comment Share on other sites More sharing options...
mellonman Posted April 1, 2012 Share Posted April 1, 2012 normally when you buy the afr sensor kit it will come with the bung mate, i know the aem one does, but not the choice i would go for again as its narrow band simulation doesnt work on my one and aem them self say its hit and miss, and i would of liked a wider range then 10 - 18 Quote Link to comment Share on other sites More sharing options...
fastcar Posted April 1, 2012 Share Posted April 1, 2012 i wouldnt weld it to your manifold fella!! you have to be at least 36 inches away from exhaust outlet from what i can remember from the instruction. I have my sencor bung weilded just after the second decat pipe on the exhaust. AEM recomend that distants so that the sencor wont get fryed Quote Link to comment Share on other sites More sharing options...
pjavon Posted April 1, 2012 Author Share Posted April 1, 2012 Fail;) Sorry I got a bit mixed up there, I meant EGT boss:imsorry: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.