Jump to content
The mkiv Supra Owners Club

UK Made One Piece Propshaft for tt 6spd Supra


stuart hydzik
 Share

Recommended Posts

a chucky looking bit of kit. Do you still need to use the rubber doghnut or does it bolt directly to the diff?

 

Looks like it uses the donut to me so a bit of a weak point as thats what normally fails, the yanks use bigger UJ's and ally adaptors on the toyota box and diff flange

Link to comment
Share on other sites

Is also madness to have the donut next to a Uj, the donut needs positive location drive and the Uj will try and buck when shock loaded, and run out of true due to the donut being a flexible drive that's only intended as a "Cush" shock absorber and should only be coupled as THE end joint so it's centre pin keeps it straight to it's driveshaft

 

You may find this causes some weird vibrations

 

You'd be better doing away with the donut and being careful (if your manual and notauto) not to shock load the diff/transmission

Link to comment
Share on other sites

A lot more in an Auto !!! and depends on age and condition of the donut, no good for a performance prop it the weakest link in the prop so madness to leave it

 

interesting i would have thought auto donut would have failed before the manual one considering the BHP output the manual can hold

 

Is also madness to have the donut next to a Uj, the donut needs positive location drive and the Uj will try and buck when shock loaded, and run out of true due to the donut being a flexible drive that's only intended as a "Cush" shock absorber and should only be coupled as THE end joint so it's centre pin keeps it straight to it's driveshaft

 

You may find this causes some weird vibrations

 

You'd be better doing away with the donut and being careful (if your manual and notauto) not to shock load the diff/transmission

 

somthing for future referance:thumbs:

Link to comment
Share on other sites

interesting i would have thought auto donut would have failed before the manual one considering the BHP output the manual can hold

 

 

 

somthing for future referance:thumbs:

 

The auto does not shock it as much as the man gear change, its the same part auto or man.

Link to comment
Share on other sites

The auto does not shock it as much as the man gear change, its the same part auto or man.

 

Got ya

 

No donut needed, I was told to bolt it directly on to the diff.

I will bolt it on this weekend.

See how it goes.

 

Yeah keep us posted on how it goes

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.