Brazil Posted February 26, 2012 Share Posted February 26, 2012 I had a Southbend stage 2 clutch fitted 1.5yrs ago and since then I've only done 7k miles 'normal fast road driving'; recently its started to slip on the high gears. When I fitted the clutch I didn't replace the flywheel I find it hard to believe that the clutch is worn already, what do you think? Am I able to just replace the flywheel? Quote Link to comment Share on other sites More sharing options...
Scott Posted February 26, 2012 Share Posted February 26, 2012 Flywheel can be replaced on its own no bother. I would be surprised if it wasn't the clutch failing though. Quote Link to comment Share on other sites More sharing options...
fuldhat Posted February 27, 2012 Share Posted February 27, 2012 You will know, once you pull it out, if the clutch has worn down or if the Fly wheel needs replacing. But before that I am not sure, you can do anything to check.. Some else might have an idea. My Southbend stage 3 is working fine, but has also done only 2000 miles Quote Link to comment Share on other sites More sharing options...
sdistc Posted February 27, 2012 Share Posted February 27, 2012 Wow, my Exedy triple carbon isn't slipping after 12000 km. Perhaps you have a faulty clutch? Quote Link to comment Share on other sites More sharing options...
Brazil Posted February 27, 2012 Author Share Posted February 27, 2012 Wow, my Exedy triple carbon isn't slipping after 12000 km. Perhaps you have a faulty clutch? I am puzzled too and will be really annoyed if its the clutch that is worn....! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.