Jump to content
The mkiv Supra Owners Club

Adjustable Rear Control arms?


JamieP
 Share

Recommended Posts

I need some adjustable rear control arms for my car, i like it low and im running to much camber to get the most out of my 335 wide rears, ive seen the Titan/PHR and Ikea ones, anyone had any problems with them?

 

Or do you know of other make ones, Im sure there are others available?

 

 

http://www.titanmotorsports.com/timorecoarmk.html

 

http://powerhouseracing.com/Templates/frmtemplateM7.asp?SubFolderID=22&SearchYN=N

Link to comment
Share on other sites

Hi Jamie,

 

I'm running the full Ikeya set (I got mine through Nic, though RHD Japan is one possibility: http://www.rhdjapan.com/toyota/jza80-supra/links-rods-arms), and combined with the ProEFI, the stability in the rear is phenomenal... I personally haven't had experience with the PHR gear though was previously running the Titans which were also great.

Link to comment
Share on other sites

The PHR ones look really cheap IMO, I would always choose the Ikea just based on the way the PHR ones look.... knowing of course how good the Ikea ones are anyway. I held a set of rear lowers in my hand and they really didn't look to clever for the money involved.

Link to comment
Share on other sites

Wont you need both the upper and lower arms ?

 

The stock rear lower arms haven't exactly got lots of adjustment, obviously depends how much you

need to pull the top in by as i guess your having clearance issues if you reduce the camber

Link to comment
Share on other sites

There are other sources for them, but I have had nothing but positive experiences with RHD Japan. I'm sure there are other members here who have ordered through them. Quite a few aussies use them too in addition to nengun and greenline.

 

Edit: Just a couple from a quick search:

 

http://www.mkivsupra.net/vbb/showthread.php?260867-Interior-retrim-ideas&p=3281899&highlight=rhdjapan#post3281899

http://www.supraforums.com/forum/showthread.php?654012-Ogura-clutches&p=8555349&highlight=rhdjapan#post8555349

Link to comment
Share on other sites

Wont you need both the upper and lower arms ?

 

The stock rear lower arms haven't exactly got lots of adjustment, obviously depends how much you

need to pull the top in by as i guess your having clearance issues if you reduce the camber

 

 

 

I dont have any clearance issues, loads of room in there, its just the stock rears are max'd out on the settings and id still like to pull out another degree of camber, if i raise the back a little its fine but i like it low on my 18's

Link to comment
Share on other sites

Yeah i want the Ikea ones, £622 with delivery aint bad, would like some feedback about rhd japan before i order though.

 

Jamie, I bought loads of stuff of RHD Japan a few years back. Very good prices back then and the more you buy the cheaper the prices. No issues with them and delivery was secure and quick.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.