Briggsy Posted January 16, 2012 Share Posted January 16, 2012 Hi guys Basically I'm building a road legal track supra , my question ...I'm In the process of getting rid of unwanted wiring. All I want remaining is Heaters Odometer cluster,oem warning ect I have the two dash looms and body looms out so do I just unplug unwanted items trace wires to wherever they go and remove pins from that particular connection/fuse board. It seems the heater controls go back to the white plastic abs unit located behind radio,am I right in thinking there are two abs controll units (white plastic with orange connectors). (silver metal with white connectors) Using my above method am I likely to encounter problems in the future I have used the search to death there is info but my knowledge is limited Thanks mark Quote Link to comment Share on other sites More sharing options...
Briggsy Posted January 16, 2012 Author Share Posted January 16, 2012 Sorry just to add needs to be road legal so lights ect will be retained Quote Link to comment Share on other sites More sharing options...
supra matt Posted January 16, 2012 Share Posted January 16, 2012 the abs on the heater control unit just stands for the abs plastic its made of mate ,and what you wont to do will be fine . Quote Link to comment Share on other sites More sharing options...
Briggsy Posted January 16, 2012 Author Share Posted January 16, 2012 Haha feel like a bit of a gimp now been looking at theses looms for a few days now me head is a bit fried So unplugging and tracing back will be fine for unwanted items such as the actual .....abs:innocent: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.