Guest Kmichael Posted January 12, 2012 Share Posted January 12, 2012 (edited) Hi Guys we are back to working on this project. Need help with vvti harness, On the harness were the mass air wires branch off main harness there are also 2 wires that go some were els 1 is a white wire with green stripe the other is a white wire with a blue stripe. its cut there and dont now were they go. At this point are engine starts right up but only idles and when given fuel stalls will not rev . Dont now if the 2 wires have anything to do with this issue but just tring to elliminate loose ends at this pointHope someone can help us thanks K Edited January 12, 2012 by Gaz6002 (see edit history) Quote Link to comment Share on other sites More sharing options...
abtin90 Posted January 12, 2012 Share Posted January 12, 2012 Hi mate it might be better if you post this in the technical section, you'd prob get a better there. Sorry I can't be of more help. Quote Link to comment Share on other sites More sharing options...
wile e coyote Posted January 12, 2012 Share Posted January 12, 2012 Hi mate dont know if any of this will help Quote Link to comment Share on other sites More sharing options...
Guest Kmichael Posted January 12, 2012 Share Posted January 12, 2012 Thanks I will,K Quote Link to comment Share on other sites More sharing options...
Guest Kmichael Posted January 12, 2012 Share Posted January 12, 2012 Thanks but I dont see it there ,K Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted January 12, 2012 Share Posted January 12, 2012 Moved your thread to technical and changed the title so you're more likely to get help Quote Link to comment Share on other sites More sharing options...
wile e coyote Posted January 12, 2012 Share Posted January 12, 2012 ok thats all i have sorry Quote Link to comment Share on other sites More sharing options...
Guest rpk2012 Posted February 24, 2012 Share Posted February 24, 2012 The internet has tons of information, some easy, some hard to find. Here are a few tidbits. -http://www.supramania.com/forums/showthread.php?153102-Your-1JZ-GTE-And-2JZ-GTE-Swap-Guide-For-Dummies - http://www.supras.nl/index.php?option=com_content&task=view&id=34&Itemid=50 - http://wilbo666.pbworks.com/w/page/37092272/Wiki%20-%20wilbo666 (Best pin outs) Maybe with some luck these have the information you need. I know it has been like pulling teeth to get info on VVTi harness. ~Ryan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.