Guest ugp Posted January 6, 2012 Share Posted January 6, 2012 I'm needing something to replace my stock M/C which can disperse more fluid. My slave cylinder (hilux job) has plenty of travel left, and another 3-4mm is required to disengage my clutch properly. I've tried adjusting the rod on the pedal, which helped to some degree, but it needs just that little bit extra travel to work smoothly. If I extend the slave cylinder pin, the release bearing will be in contact with the pressure plate all the time - not good. Does anyone have a direct swap / something else I could try? Thanks Ben Quote Link to comment Share on other sites More sharing options...
DARETT Posted January 6, 2012 Share Posted January 6, 2012 This should do the trick http://www.twinsturbo.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=118&category_id=1&manufacturer_id=0&option=com_virtuemart&Itemid=8 Quote Link to comment Share on other sites More sharing options...
Guest ugp Posted January 6, 2012 Share Posted January 6, 2012 This should do the trick http://www.twinsturbo.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=118&category_id=1&manufacturer_id=0&option=com_virtuemart&Itemid=8 Perfect! Does anyone have a second hand one for sale before I go and spend some more money? Darett - Looks like we shall now be singing on the double 6 for 'Pod. Quote Link to comment Share on other sites More sharing options...
chazuk Posted January 6, 2012 Share Posted January 6, 2012 Thats not that expensive in £ , I wonder how much difference this would make to a heavy clutch pedal Quote Link to comment Share on other sites More sharing options...
Rinus Posted January 10, 2012 Share Posted January 10, 2012 Or buy a facelift 6speed slave-cinder, it has a smaller bore, so more clutch travel... Quote Link to comment Share on other sites More sharing options...
Guest ugp Posted January 10, 2012 Share Posted January 10, 2012 (edited) Or buy a facelift 6speed slave-cinder, it has a smaller bore, so more clutch travel... Really, now that's interesting! Can anyone else confirm they have had good results with these? Edit: Just read that again and realized what you meant, I'm using a Hilux slave cylinder on a custom made bell housing, so cant use the slave cyl from a TT6. Edited January 10, 2012 by ugp (see edit history) Quote Link to comment Share on other sites More sharing options...
imi Posted January 10, 2012 Share Posted January 10, 2012 Yes, I run one and it does increase the travel in order for the aftermarket clutch plate to release properly. Quote Link to comment Share on other sites More sharing options...
Guest ugp Posted January 11, 2012 Share Posted January 11, 2012 Won't fit on my bellhousing I'm afraid. Quote Link to comment Share on other sites More sharing options...
Scott Posted January 11, 2012 Share Posted January 11, 2012 Thats not that expensive in £ , I wonder how much difference this would make to a heavy clutch pedal It would make it heavier. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.