Graham1984 Posted November 28, 2011 Share Posted November 28, 2011 I know on my Na I need the push in O2 sensor which from rock auto should be this DENSO Part # 2341055 but if I was going to change my manifold to need the screw in types what O2 sensors from here or other places have people been using. Any links and part numbers would be great although the rockauto site seams the cheapest place to get them. Quote Link to comment Share on other sites More sharing options...
FOSTA Posted November 28, 2011 Share Posted November 28, 2011 I would get oem sensors mate! When I done the conversion On my car, the down pipe had the screw in holes for the sensors so I bought bosh single wire sensors and it made the car run lean and hesitate alot. I now have had an adaptor plate made and welded in place to use the stock sensors it its running good! I know they work for some people but I'd be carefull on what sensors you buy as mine didn't work Quote Link to comment Share on other sites More sharing options...
Graham1984 Posted November 28, 2011 Author Share Posted November 28, 2011 Ok cheers for that I know the manifold depends if its flange or screw in but I have no idea what one is what or what works as rock auto sell loads for supras but it is a mystery to me what I need. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.