JMB Posted November 19, 2011 Share Posted November 19, 2011 (edited) Hi all! As i wrote down in an other thread, i have a 98 vvti TT tiptronic supra I bought it stock. --------------------------------------------- UPDATE 20/10/2013 last things done : - Hks boost control (EVS-C) - Greddy Boost Cut Controler (made by speed for sale) - Mishimoto Blaffed Oil Catch Can - Remove the charcoal canister mod list (see also my garage) : - Hks SLD - Hks ssqv III (leave it atmospheric) - blitz catback - blitz air filter - TRD rear wing - paint the dash board in white - JVC stereo + changed all the speaker - Focal Subwoofer - 3" down pipe (I add some thermal wrap from DEI) - 3" mid pipe (I add some thermal wrap from DEI & I plug my AEM AFR gauge to it) - 2.5" restrictor ring - denso ik22 spark plugs - changed the fuel filter - 12V fuel pump mod. - Walbro GSS342 fuel pump - AEM AFR & boost gauge (installed on whifbitz carbon pillar pod) - Hks turbo timer type 1 (never succeed to set the speedometer) - momo gear knob - HSD coilovers - TRD front strut bar - modified tanabe rear strut bar - HKS teflon brake lines - Porterfield racing brake pads - Whifbitz intercoller - Whifbitz radiator silicon hoses - Seibon TS hood + reflect-a-gold (DEI's good product to protect my CF hood) - Seibon truck - Top Secret Type 2 Bumper I also have but not yet installed : - U.R. Pulleys - TRD thermostat - Race Logic Traction Control (start the install) Any Advice or help Will BE gratefull Edited December 11, 2013 by JMB updating the modification (see edit history) Quote Link to comment Share on other sites More sharing options...
Nic Posted November 19, 2011 Share Posted November 19, 2011 You'll also need some cooler grade spark plugs. A new fuel pump (Walbro GSS342 or Bosch 044) would also be a good idea. Quote Link to comment Share on other sites More sharing options...
JMB Posted November 20, 2011 Author Share Posted November 20, 2011 Thanks, Just order the pump I ll look forward some good spark plug later How about the coilovers or ignition wire ? Quote Link to comment Share on other sites More sharing options...
JMB Posted January 25, 2012 Author Share Posted January 25, 2012 (edited) I install: - AEM AFR & boost gauge - Hks turbo timer type 1 (Will be help full as speedometer) - new stereo I did paint the dash board, when I'll finish I put some cool pictures... find attached some work in progress pictures. Edited December 31, 2012 by JMB (see edit history) Quote Link to comment Share on other sites More sharing options...
JMB Posted January 25, 2012 Author Share Posted January 25, 2012 can't uplaod because of the size of my picts will reduce them tonight ! Quote Link to comment Share on other sites More sharing options...
merckx Posted January 25, 2012 Share Posted January 25, 2012 Why don't you host the photo's on somewhere like photobucket? Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted January 25, 2012 Share Posted January 25, 2012 Why don't you host the photo's on somewhere like photobucket? Because we can't move it to the projects section if if you use Photobucket. It prevents pictures being moved by PB and gives us an archive that'll be there forever. Quote Link to comment Share on other sites More sharing options...
merckx Posted January 25, 2012 Share Posted January 25, 2012 Sensible. Quote Link to comment Share on other sites More sharing options...
JMB Posted January 27, 2012 Author Share Posted January 27, 2012 ok I just finished installin gmy boost gauge tomorrow I will put everything back to its place Can't wait to install my exhaust line next As I live in a very hot country, I prefer waiting to have a new intercooler before installing my boost control. Quote Link to comment Share on other sites More sharing options...
JMB Posted January 28, 2012 Author Share Posted January 28, 2012 enjoy very proud of me ! Quote Link to comment Share on other sites More sharing options...
andz222 Posted January 28, 2012 Share Posted January 28, 2012 nice job jmb Quote Link to comment Share on other sites More sharing options...
Delboy52 Posted January 28, 2012 Share Posted January 28, 2012 Nice work on the dash! Quite like your black & white look. Quote Link to comment Share on other sites More sharing options...
JMB Posted January 29, 2012 Author Share Posted January 29, 2012 Thanks !! When I ll have more time I ll work on the seats, they are really pleasant when driving but not that nice when it s about showing them Quote Link to comment Share on other sites More sharing options...
Jurgen-Jm-Imports Posted January 29, 2012 Share Posted January 29, 2012 nice work mate ;-') Quote Link to comment Share on other sites More sharing options...
fastcar Posted January 29, 2012 Share Posted January 29, 2012 Nice looking car and some good work on the dash. Im sure i used to have the same set wheels as you on my supra when i first got it from Japan. If they are the same they are a very rare set that was only on sale in Japan and are now discontinued. As i found out when when i damaged one of my wheels and couldnt replace it forcing me to buy a new set:( Good luck with the build it should be a good one Quote Link to comment Share on other sites More sharing options...
JMB Posted March 26, 2012 Author Share Posted March 26, 2012 ok I just installed the following : - down pipe -> I add some thermal wrap from DEI. - mid pipe -> I add some thermal wrap from DEI. -> I plug my AEM AFR gauge to it. - restrictor ring - changed the fuel filter - did the 12V fuel pump mod. I'll install this week my walbro fuel pump + denso ik22 spark plug. I didn't notice any important change in the exhaust sound... maybe at the idle... I'll have to run more the car can't wait to install my new plugs (I received them yesterday) because since 2 weeks my car has some hesitations with the 1st turbo pictures (the 2 last one are when I looked some details...wow... I think I'll have to work here too) : Quote Link to comment Share on other sites More sharing options...
JMB Posted April 11, 2012 Author Share Posted April 11, 2012 Ok, I changed my spark plugs with denso ik22. My car is not the same ! it's a new powerfull care love it !! below pictures of the old spark plugs... I also changerd the fuel pump ! I installed the walbro pump A bit of noise but works well ! To take off the "O Ring" I used a Mazda Tool ! I had to buy it for my rx8, happy to use it her : old and new pump new pump fitted I think the correct next step is the FMIC Quote Link to comment Share on other sites More sharing options...
JMB Posted December 31, 2012 Author Share Posted December 31, 2012 Hi all, long time I didn't post about my mods ! so after the standar bpu... I first decide to give some fresh look at my tiptronic gearknob and my abflugs wheels the momo gear knob looks nice with the white Dash Board the bronze wheels + white supra is so Sexy then I decide to change all the coilovers for HSD .... old & new... no comment finish is more then correct (I upper the car 1cm front and 1.5cm rear to pass throw every bump) TRD strut bar + HSD... lovely Quote Link to comment Share on other sites More sharing options...
JMB Posted December 31, 2012 Author Share Posted December 31, 2012 ...and meanwhile cleaning the brakes as the car had less brake power then my mitsubishi l200 cleaning painting ! Ouch ! Big problem when I tired to change the OEM brake line ! the tool to have ! fixing the line... old brake line & new HKS brake line everything fitted + porterfield race brake pads racing brake oil AWSOME RESULTS Quote Link to comment Share on other sites More sharing options...
JMB Posted December 31, 2012 Author Share Posted December 31, 2012 And finaly, I decid to give a special "touch" with a supra rear strut bar sorry for all the photo quality, my Iphone suffer a lot lol tanabe rear strut bar painting the middle in black painting all in white love the result !! everything fitted Quote Link to comment Share on other sites More sharing options...
Parry_10 Posted January 1, 2013 Share Posted January 1, 2013 good work mate:) and good luck keeping those calipers white;) Quote Link to comment Share on other sites More sharing options...
tooquicktostop Posted January 1, 2013 Share Posted January 1, 2013 Where in the world are you, nice car btw Quote Link to comment Share on other sites More sharing options...
JMB Posted January 3, 2013 Author Share Posted January 3, 2013 (edited) Thanks all I live in "Guadeloupe" (see google earth), but my car is JDM spec and from JM import A very cool travel to a country I felt in love, feel now like UK lol I drove all country from JM import (thanks to Jurgen for teaching me rhd rules ^_^) to Paris then to Rouen for boat travel to Guadeloupe Edited January 3, 2013 by JMB Correcting my English (see edit history) Quote Link to comment Share on other sites More sharing options...
JMB Posted April 20, 2013 Author Share Posted April 20, 2013 I hit a wall in a drag race end of 2012. but my car is back for business... hotter then ever some picts of body work and result : I had (not finish on the picture) some DEI reflect-a-gold to prect the carbon fiber. Quote Link to comment Share on other sites More sharing options...
JMB Posted December 11, 2013 Author Share Posted December 11, 2013 HKS EVS-C installed positionning the mishimoto catch can intstead of charcoal canister going to the oïl catch can engine done New Tire to glue the car to the ground Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.