Jump to content
The mkiv Supra Owners Club

Hungarian Jza80 build up with 1.5JZ


Lacee
 Share

Recommended Posts

Hi all,

Runing a shop here in Hungary and build Toyotas(Celicas,Supras) for 12years, now decided to make a thread for the build up.

With a lot of experience with 1JZ and 2JZ engines, now try to build up a "low" cost, high HP engine for the A80 Supra.

The car itself is a white auto. JZA80, with 2JZ-GE engine Japan import.

I would like to finish the car at the end of January, with:

-1.5JZ engine

-VEMS stand alone

-conversion to manual

-suspension upgrade

-brake upgrade

-restore the the whole car (exterior, interior)

The first couple of week i will collect the parts..

i think that's all now.

Post a few pics of the first parts tha arrived to the shop.

20110916143.jpg the car itself

20111002148.jpg waterpump, injectors(1000cc RC), WG (60mm XS power), manual trans cover

20111002149.jpg RC 1000cc

20111002156.jpg stock TT front brake disc for BBK project and rear pads.

 

I hope you all will enjoy the thread, and understand my bad english :D

Link to comment
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Nice to see someone doing 1.5JZ write up :) I'll be also doing this for my drift project but I'm gonna leave stock turbos for now.

 

What compression are you going to run?

 

Good luck with the project!

 

i'm gonna run a GT35 or a GT40, with a bit high comp. around 9.2-9.5 with E85

Link to comment
Share on other sites

Okay, today not much happend, i borrow a bottom end from my friend, had taken apart and took in to the machine shop, to hone, deck the head surface, clean, get new rings.

Got a set of bearings(clevite 77).

20111005161.jpg the bottom end :D

20111005166.jpga turbo and an N/A piston

 

at next week the bottom end will be back from the machine shop.

Link to comment
Share on other sites

  • 2 weeks later...

Nothing much happend this week, just got a few parts, and drilled the hole for the oil return AN-10 fitting on the upper N/A pan.

Put on DriftMonkey stickers on the car :D

20111012175.jpg the hole for the oil return

20111012179.jpg the Aeromotive fuel pump, i will use 2 of them and Sickspeed wheel nuts :D

20111005167.jpg the clevite77 bearings, and a new water neck

20111015181.jpg DriftMonkey

That's all now, at the next week i hope my bottom end will back from the machine shop, and i can travel to England to pick up a manual conversion and maybe a set of coil over :D

Link to comment
Share on other sites

  • 4 weeks later...

Sure, but i have a lot of work in the shop so don't have to much time to take care with my Supra, but i was in England to pick up some parts for the car. First is a manual conversion kit from m_life (thanks Martin). I'm still waiting for my JIC Magic coils, and looking for a set of rims (rota grid in 18x9.5 et20)

20111107265.jpg these are from England :D some interiors panel and a dash :D

20111107264.jpg W58 and all that need for the conversion, i hope it will not broke immediately, if yes i will go with a dog box made from the W58.

I will keep on update as i able to work on the car.

I have also ordered a spec stage5 clutch and a koyo rad for the car...

Link to comment
Share on other sites

Hoops i forget we put on my HKS muffler and made the exhaust system to 3" SS from the cat back :)

20111022210.jpg this is how it looks, it will all the was 3" as i put on the turbo..

20111022209.jpg this is my JZA80 in my frined's shop how made exhaust systems, cooler pipe...you can see my old car also the MA70 with 1JZ.

Link to comment
Share on other sites

  • 2 weeks later...

Oky, so i'm back from the UK and here are the pics that i have missed:

-20111107264.jpg this is my w58 got it with the manual conversion kit from m_life (thanks Martin)

-20111107265.jpg some interior parts also from the UK,

-20111124325.jpg ARP flywheel bolts, IC , some purple stuffs, PSR, and outer tie rods for my projects

-20111124326.jpg ROTAs 18x9.5 et20 :D :D

-20111124327.jpg JIC Magic

 

soon the real work will start and more pictures will come :D,

this week i got my clutch, my Koyo rad...

pictures come on next week

Link to comment
Share on other sites

this week i got the KOYORAD, and the spec stage5 clutch with uprated pressure plate. Now i'm affraid that i will brake my W58 at the first time i drive the car hard.

20111207376.jpg

20111207378.jpg

I can't wait untill i can start to work on the car.... Have a lot of idea i would like to do with the car.

Link to comment
Share on other sites

  • 2 weeks later...

Oky guys, the works just started.

Yesterday and today a did a lot of work on the car, and get some stuffs from Toyota,i will make pics, maybe on Friday.

I have removed the full interior of the car, and installed the JIC and put on the ROTAs.

the car in the shop :20111220419.jpg

driver seat removed:20111220422.jpg

dash almost removed:20111220423.jpg

dash removed:20111220425.jpg

carpet also removed:20111220426.jpg

the hole where the clutch master cylinder goes:20111220427.jpg

this is how the car sits when i left the shop today, i will keep on the work tomorrow, and after Xmas :20111221445.jpg

I have few more pics, i will post it soon...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.