Noz Posted October 3, 2011 Share Posted October 3, 2011 Hi guys, doing some simulation of dynamic systems for engines and automotive design, consider I already have most of the values to hand through my own research out of subject due to personal interest thought I would do the supra and its engine, but there are some values that Im struggling to find, wanted to know if there was anyone that would be able to help me. I'm looking for mass of standard alloys, im running 18's otherwise I would just weigh them :-) Moment of inerita of each wheel, this is quite specific so I might have to just assume this is going to be an average of 0.4kgm^2 which is a maxmimum for most cars. The vehicle frontal area, A (in m^2) The vehicle drag coefficient. I know some of you guys have actual done 3D modelling of supra's, maybe some further design work has been done on these and hopefully someone can help me. Other stuff is just maximum torque values and gear ratios but that's just basic stuff I have to hand. Thanks in advanced for any help on this issue. Quote Link to comment Share on other sites More sharing options...
Noz Posted October 3, 2011 Author Share Posted October 3, 2011 I don't require the drag coefficient anymore, GZ/RZ is 0.33 and SZ is 0.3 :-) Quote Link to comment Share on other sites More sharing options...
Dnk Posted October 3, 2011 Share Posted October 3, 2011 Drag Coefficient from what i've read is .33 for the uk tt with the bonnet air scoop Quote Link to comment Share on other sites More sharing options...
Guigsy Posted October 3, 2011 Share Posted October 3, 2011 (edited) The sz is lower because as stock it came without the wing I think? And the others had the active spoiler Edited October 3, 2011 by Guigsy (see edit history) Quote Link to comment Share on other sites More sharing options...
Noz Posted October 3, 2011 Author Share Posted October 3, 2011 Interesting input, I thought all models came with the spoiler. Anyone have any input on the frontal area? Quote Link to comment Share on other sites More sharing options...
Guigsy Posted October 3, 2011 Share Posted October 3, 2011 It was an option that 90% took I think. Could be wrong Quote Link to comment Share on other sites More sharing options...
Noz Posted October 4, 2011 Author Share Posted October 4, 2011 bump - frontal area? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.