Rob_Mitchell Posted August 22, 2011 Share Posted August 22, 2011 hey guys used the search but not much luck. looking for some pics of the front mount fitted with a do-luck front bumper? and what parts need trimming or cutting off? Quote Link to comment Share on other sites More sharing options...
Jamesy Posted August 22, 2011 Share Posted August 22, 2011 I choppeda lot of my middle bit away to get more air into it mate: Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted August 22, 2011 Author Share Posted August 22, 2011 great pic, thanks jamesy. Quote Link to comment Share on other sites More sharing options...
hodge Posted August 22, 2011 Share Posted August 22, 2011 I had a 4" cooler fitted to my blue supra with a Do-luk front and only had to take about 3mm off all round for a perfectly flush fit. Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted August 22, 2011 Author Share Posted August 22, 2011 I had a 4" cooler fitted to my blue supra with a Do-luk front and only had to take about 3mm off all round for a perfectly flush fit. cheers john im going to start marrying it up at some point and get it on the fitting perfect. i sort of knew i needed to chop the bumper about but they look awesome with a front mount Quote Link to comment Share on other sites More sharing options...
hodge Posted August 22, 2011 Share Posted August 22, 2011 Put some masking tape on the end tanks and some cardboard over the fins while your taking the bumper on and off or you'll mark the IC pretty badly. I did with my blue car and it took ages with a polishing mop to get the digs out. Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted September 19, 2011 Author Share Posted September 19, 2011 This is proving to be a nightmare , hopefully ill get it done by the weekend Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.