will these fit ?

looking at some work emotion cr kai's in fronts 17x9 et17 and rears 18x9.5 et20 anyone know if they will clear uk specs ?? as im not in a position to try them for size so to speak

cheers dan

what's the front offset like? ET20 on a 9.5" for the rear will definitely scrub the inner fender, ET35 will just be perfect otherwise a higher figure.

The offsets are too small, the wheels/tyre would stick out past the arches.

If you compare those wheel sizes/offsets to the stock wheels, the fronts would extend out 46mm towards the wheel arches, the rear 30mm.

its not a problem rolling the arches even with a slight flare, was more of a concern with clearing they brakes ?

cheers dan

its not a problem rolling the arches even with a slight flare, was more of a concern with clearing they brakes ?

 

cheers dan

The spokes on the work emotion cr kai should clear the larger brakes, but I'd test fit them if you can to be sure.

You will need to either flare the arches quite a bit or add wheel arches, these are 18x9 +32 on the front and needed the arches rolling, the wheels you are asking about would sit another 1.5cm further out.

It can be done if you are willing to work at it, ive had 11" et24 on the front of mine with stock arches, with a heavy roll/pull they cleared, the paint did crack on both arches though.