1993 1/2 supra 2jz-ge to J spec 2jz-gt3 vvti engine swap 1997.8 engine

Hi to all,We are currently tring to complete this supra non turbo auto open rear to a twin turbo 6 spd limited slip rear car. Swap 95% completed and car running at adle only. Not 100% sure if upper fuse area is right. The body plug has 3 wires black white and black,red.Engine has 5 wires black white black,red and blue,red. We hooked up black to black white to white black,red to both black,red wires on engine.The blue,red wire we wired to a 15amp fuse think it goes to the ecu c7. Could anyone help us if wiring is right and if so any other help on car idle only Thanks, Kmichael

This link may help............

http://www.mkivsupra.net/vbb/showthread.php?156635-NA-to-TT-conversion-problems&highlight=wiring

and this one...page 2......

http://www.mkivsupra.net/vbb/showthread.php?136136-NA-to-TT-engine-transplant-step-by-step-guide-(Pic-heavy)&highlight=wiring

Thanks for your help

UPPER FUSEBOX CONNECTOR for VVTi TT:

No code has to be inserted here.

Ops double post... sorry...