Rob_Mitchell Posted April 8, 2011 Share Posted April 8, 2011 hey guys really pulling my hair out at the moment. Does anyone have a diagram of sensor location/names on the engine block? where i bought a bare block i obviously have no sensors, help is much appreciated. Quote Link to comment Share on other sites More sharing options...
Awisto Posted April 8, 2011 Share Posted April 8, 2011 On the actual block itself, I don't think there's many at all from memory. 2 X knock sensors - intake side, cylinders 2 & 5 IIRC 1 X crank position sensor - left hand side at the bottom (tucked below the alternator if that was on) 1 X oil pressure - can't remember right now Nothing else comes to mind right now. Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted April 8, 2011 Share Posted April 8, 2011 Oil level sensor as well Quote Link to comment Share on other sites More sharing options...
Awisto Posted April 8, 2011 Share Posted April 8, 2011 You can see the knock sensors here. 2 head stud up on the right, directly on the right is a sensor with a plug and wire coming from it, that's number 1, then go to the 5th stud up one the right, and on the right you can just see the 2nd knock sensor (pic is an aristo, but same locations) http://gallery.me.com/garage2you/100084/IMG_0604/web.jpg Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted April 8, 2011 Share Posted April 8, 2011 Heres a pic of some of them, the crank sensor is under 'oil pump' Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted April 8, 2011 Author Share Posted April 8, 2011 bloody hell guys thats smashing thanks alot, should keep me busy for a while. cheers Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted April 8, 2011 Author Share Posted April 8, 2011 it was the oil pressure one i was unsure about, plus the knock sensors have different connectors but ill work that out when the loom arrives Quote Link to comment Share on other sites More sharing options...
Nic Posted April 10, 2011 Share Posted April 10, 2011 http://www.turbosupras.com/pages/en/pages/specifications/JZA80/a80tsrm.htm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.