Arch Rolling

getting my new wheels monday morning, they are 8.5 on the front 35 offset and 9.5 on the rear 30 offset

i know the front will fit as had a 35 offset on there before but not sure on the rear. whilst i am out on monday any one know a company who could roll the archs either near Coulsdon / Croydon or Maidstone

thanks

Have you tried Arch enemy? IIRC, they cover the UK.

not yet but was trying to find someone static in kent so I coudl 'pop in'

9.5 with 30 offset on the rear wont need rolling will it ?

if not im all good just want to plan for all outcomes!

got spigot rings, picking up tuner nuts and then wanted to sort rolling if required

If your suspension is hard (e.g. Tein HA) or sitting pretty high you'll be fine with 245/40/18 and 275/35/18 in 99.9% of all driving.

If you run low or with sensible softer suspension then the front will be fine 99% of the time if you run a 245/35/18. If you went to a 245/40/18 it will probably rub on deep troughs/bumps if you hit one whilst turning. The rears could rub on a big bump.

Personally I'd try it with no rolling and see how it goes.

at the moment it only has 225 40 18 on front and 245 40 18 on rear so should be fine

In that case you'll have no worries at all