Samurai 20V Posted March 4, 2011 Share Posted March 4, 2011 (edited) Hi guys, came across this used decat setup, do you think its worth it? Price is 30000yen (220pounds). The spec is 75mm for the 1st decat, 2nd decat is Apexi 80mm. Is this acceptable for BPU (with RR of course)? I could use the HKS midpipe which is 75mm, price is around the same. Does these decats look decent enough? The advantage for me is it is in Japan, easier to source. Opinions? Thanks! Edited March 4, 2011 by Samurai 20V (see edit history) Quote Link to comment Share on other sites More sharing options...
japke_mk4 Posted March 4, 2011 Share Posted March 4, 2011 why you dont buy a japspeed decat ? the cost not alot and are 3 inch the whole exaust cat back systel of japspeed kost around 299 pond its include exaust youre under body lijn and decatand NEW reagers the first decat cost 99 pond http://www.japspeed.co.uk/Toyota-Supra/Toyota-Supra/Toyota-Supra-Mk4-1st-Decat/p-28-1-491/ and the whole exaust http://www.japspeed.co.uk/Toyota-Supra/Toyota-Supra/Toyota-Supra-MK4-CAT-Back-System/p-28-1-492/ Quote Link to comment Share on other sites More sharing options...
Samurai 20V Posted March 4, 2011 Author Share Posted March 4, 2011 Looking for something in Japan mate... But thanks for the reply. Quote Link to comment Share on other sites More sharing options...
Nic Posted March 5, 2011 Share Posted March 5, 2011 Should be fine, the 5mm difference in diameter will make no difference. If it's the cheapest option out there then may be worth going for. Quote Link to comment Share on other sites More sharing options...
Samurai 20V Posted March 5, 2011 Author Share Posted March 5, 2011 Should be fine, the 5mm difference in diameter will make no difference. If it's the cheapest option out there then may be worth going for. Thanks Nic... I think I will go for it.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.