Guest blueangel Posted March 1, 2011 Share Posted March 1, 2011 I replaced the dash loom not long ago and replaced the alarm aswell and now the car wont turn over what am i missing ! Quote Link to comment Share on other sites More sharing options...
Scott Posted March 1, 2011 Share Posted March 1, 2011 Won't turn over or won't fire? Getting contrasting info here Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 1, 2011 Share Posted March 1, 2011 More accurate info required Rik Quote Link to comment Share on other sites More sharing options...
Guest blueangel Posted March 1, 2011 Share Posted March 1, 2011 it turns over but wont fire could it be the igniter i can smell petrol so fueling is there Quote Link to comment Share on other sites More sharing options...
JustGav Posted March 1, 2011 Share Posted March 1, 2011 Check all the loom bits are plugged in.... I had the green connector on the otherside of driver's fuse box disconnected and I couldn't solve it for days! Quote Link to comment Share on other sites More sharing options...
Guest blueangel Posted March 1, 2011 Share Posted March 1, 2011 all plugged in dude whats the green plug in the middle of the dash for thats just hanging Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 1, 2011 Share Posted March 1, 2011 I think its a case of go over everything you've done to double check its all plugged in etc and then take it from there. Quote Link to comment Share on other sites More sharing options...
Guest blueangel Posted March 1, 2011 Share Posted March 1, 2011 done it twice now atleast fella even put the old loom back in to see if its the new loom at fault this has me completely baffled Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 1, 2011 Share Posted March 1, 2011 Take a plug out, turn the engine over with the plug earthed and see if its got a spark would be my next move Quote Link to comment Share on other sites More sharing options...
Guest blueangel Posted March 1, 2011 Share Posted March 1, 2011 yeah think ill try it in the morning its got no exhaust on lol Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 1, 2011 Share Posted March 1, 2011 No problem if its not starting but you'll cross off lots of reasons why if theres no spark Quote Link to comment Share on other sites More sharing options...
Guest blueangel Posted March 1, 2011 Share Posted March 1, 2011 gimme ten mins and ill have a go Quote Link to comment Share on other sites More sharing options...
Guest blueangel Posted March 1, 2011 Share Posted March 1, 2011 ok i have sparks and fuel in the chambers Quote Link to comment Share on other sites More sharing options...
Guest blueangel Posted March 1, 2011 Share Posted March 1, 2011 when i disconnected the loom i had totake off the fcd but im sure its back on correct it was only the earth i took off Quote Link to comment Share on other sites More sharing options...
Scott Posted March 1, 2011 Share Posted March 1, 2011 If you have fuel and spark then you shouldn't be having any issues (other than timing but you would get a splutter) Sounds like it is either the coil pack clips, the coil packs or the spark plugs. Give all the plugs a clean and try again. If that doesn't work you will need to do the same test on each of the coil packs/clips/plugs. Quote Link to comment Share on other sites More sharing options...
barneybrendan Posted March 1, 2011 Share Posted March 1, 2011 how good is the spark.I had this issue and replaced the plugs and it started right away. Quote Link to comment Share on other sites More sharing options...
Guest blueangel Posted March 1, 2011 Share Posted March 1, 2011 im gonna try new plugs in the morning i have some keron gave me been meaning to do it anyway lol thanks for the help guys ill keep you updated Quote Link to comment Share on other sites More sharing options...
Dnk Posted March 2, 2011 Share Posted March 2, 2011 New set of plugs is the way to go and check all the coil pack connectors when your fitting them. Then if its still not right i guess its a timing issue Quote Link to comment Share on other sites More sharing options...
Guest blueangel Posted March 2, 2011 Share Posted March 2, 2011 alls goooooood she lives guys Quote Link to comment Share on other sites More sharing options...
barneybrendan Posted March 2, 2011 Share Posted March 2, 2011 alls goooooood she lives guys and the problem was Quote Link to comment Share on other sites More sharing options...
Josh Posted March 2, 2011 Share Posted March 2, 2011 alls goooooood she lives guys Great stuff! and the problem was Hope not "no fuel" Quote Link to comment Share on other sites More sharing options...
Guest blueangel Posted March 2, 2011 Share Posted March 2, 2011 fcd earth not on Quote Link to comment Share on other sites More sharing options...
Scott Posted March 2, 2011 Share Posted March 2, 2011 Would that not mean you wouldn't be getting fuel though? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.