bigbloodyturbo Posted February 22, 2011 Share Posted February 22, 2011 When my TT blew its HG between the cylinder and a water jacket I thought about fixing it but ended up buying a 330d instead:) I'm now missing my supra and have decided to change it myself. The car is sitting in my drive doing nothing anyway so it doesn't matter how long i take to do it and/or how long it takes to source a new head if i find i need one. Has anyone done it before and got any advice on what i need or tips on the job. Any advice would be appreciated;) Quote Link to comment Share on other sites More sharing options...
Nic Posted February 22, 2011 Share Posted February 22, 2011 Step by step guide in the service manual HERE Quote Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted February 22, 2011 Author Share Posted February 22, 2011 Thanks for the link Nic, thats exactly what i was looking for, should let me get my head around the job before i wade in. Quote Link to comment Share on other sites More sharing options...
bigbloodyturbo Posted February 25, 2011 Author Share Posted February 25, 2011 can anyone confirm that the valve regrind gasket set has all the gaskets i'll need to change the HG including any for the turbo side of things? Quote Link to comment Share on other sites More sharing options...
Rob_Mitchell Posted February 25, 2011 Share Posted February 25, 2011 just get the full engine rebuild gasket kit, its perfect and has every little gasket possible. the valve regrind set does include hed gasket too though Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.