SupraMan Mk4 Posted February 18, 2011 Share Posted February 18, 2011 Hi peeps, I was driving myself crazy thinking I kept blowing bulbs in my headlamp but upon further inspection it appears the problem seems to be electrical. I can only assume with my limited technical knowledge that there is a frayed wire within the loom somewhere that will need replacing/repairing. As my headlight would start out 'off', I would then give it the old magic 'jiggle' until it came on, but after 2 minutes driving it was off again! Has anybody had a similar experience, if so, is it easily rectified or is it going to be costly. Thanks. Quote Link to comment Share on other sites More sharing options...
SupraMan Mk4 Posted February 18, 2011 Author Share Posted February 18, 2011 Anyone help with this? Can a mod let me know if this is ok in here or if it needs to be listed in the technical section? Quote Link to comment Share on other sites More sharing options...
Suprab1 Posted February 18, 2011 Share Posted February 18, 2011 Take a good look at the wires on the connector that goes on the bulb as they are pulled & twisted every time the bulbs are getting changed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.