crispy Posted January 29, 2011 Share Posted January 29, 2011 hey guys am having my engine and gearbox conversion in march. wanted to know when all fitted and put straight to bpu. If i put bpu products on car with the second hand tt ecu would the car be fine to run with bosch fuel pump for example or would i need to get the old ecu wiped or could it be mapped ? [GRIN][/GRIN] Quote Link to comment Share on other sites More sharing options...
CJ Posted January 29, 2011 Share Posted January 29, 2011 The ECU cannot be wiped or adjusted. It will be fine. Quote Link to comment Share on other sites More sharing options...
crispy Posted January 29, 2011 Author Share Posted January 29, 2011 cheers cj i thought it would be but cheaper to ask now !!!!!!! Quote Link to comment Share on other sites More sharing options...
Geo Posted January 29, 2011 Share Posted January 29, 2011 the ECU will re learn, and adjust itself accordingly. Quote Link to comment Share on other sites More sharing options...
CJ Posted January 29, 2011 Share Posted January 29, 2011 the ECU will re learn, and adjust itself accordingly. Buggernuts All those years of me fitting Motec etc for the single conversions and all i had to do was let the ECU relearn and adjust itself. I'm gutted Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.