Jump to content
The mkiv Supra Owners Club

Offset on Evolution Supra


Jellybean
 Share

Recommended Posts

I dont under stand why you want to know what offsets work on the TS car when you want wheels for a TRD car?

 

Measuring what offsets you need for various kits and widths wheels you need is very easy.

 

Use the offset calculator

http://www.1010tires.com/wheeloffsetcalculator.asp

 

 

This is how you measure offset.

https://www.rsracing.com/tech-wheel.html

Link to comment
Share on other sites

Cool thanks, i wonder how much wider these are too than stock; just trying to fig out if +12 is correct for the rear of mine with the 50mm wider arse

 

Mate, you need to consider the 50mm gap, plus the gap between the original stock wheel & offset size that comes with the Supra and the arch - there's a bit of a space there too. Your Supra, below, is running GTC 18's which do not really fill the arches in all honesty, hence the reason why I went for 19's.

 

As Jamie has mentioned, you really need to compare apples for apples or else you will go wrong big time - this can be a costly business. My wheel spec for reference purposes is 305/19/30 on the rear with an ET-12 on an 11J wheel.

 

The thing is, I wouldn't even want to hazard a guess on whether this would help you as my inner arch is non-existent and steep, meaning I don't have to compensate my wheel size for an inner lining.

 

I would give Hodge a bell as he is currently building his TRD

Edited by SupraAyf (see edit history)
Link to comment
Share on other sites

I dont under stand why you want to know what offsets work on the TS car when you want wheels for a TRD car?

 

Measuring what offsets you need for various kits and widths wheels you need is very easy.

 

Use the offset calculator

http://www.1010tires.com/wheeloffsetcalculator.asp

 

 

This is how you measure offset.

https://www.rsracing.com/tech-wheel.html

 

Cheers for that Jamie, that is exactly what I've been needing, does anyone know the width and offset of a stock wheel?

Link to comment
Share on other sites

I dont under stand why you want to know what offsets work on the TS car when you want wheels for a TRD car?

 

Measuring what offsets you need for various kits and widths wheels you need is very easy.

 

Use the offset calculator

http://www.1010tires.com/wheeloffsetcalculator.asp

 

 

This is how you measure offset.

https://www.rsracing.com/tech-wheel.html

thanks, trd website says its 50mm over stock. Was just wondering the offset so I could get an idea of how deep the dish is with a particular offset
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.